Suppr超能文献

一种改良技术用于在 L5-S1 脊椎滑脱和多节段退行性椎间盘疾病的情况下放置腓骨支柱移植物和环形融合。

A modified technique for dowel fibular strut graft placement and circumferential fusion in the setting of L5-S1 spondylolisthesis and multilevel degenerative disc disease.

机构信息

Department of Orthopedics, UMass Memorial Medical Center, Worcester, Massachusetts 01605, USA.

出版信息

Neurosurgery. 2010 Sep;67(3 Suppl Operative):ons91-5; discussion ons95. doi: 10.1227/01.NEU.0000382968.90735.7F.

Abstract

BACKGROUND

Traditional techniques for the treatment of isthmic spondylolisthesis pass a fibular dowel graft across the L5-S1 disc by using the anterior portion of the L5 body.

OBJECTIVE

To introduce a technique for the treatment of isthmic spondylolisthesis in the setting of multilevel degenerative disc disease in adults. Our modified technique allows us to traverse the L5-S1 disc via the L4-5 disc space thereby treating the degenerated disc at L4-5 simultaneously.

METHODS

A standard anterior discectomy was performed on L4-5. Using biplanar fluoroscopy, a Kirschner wire was placed beginning at the anterior third of the L5 superior endplate and ending at S1. An anterior cruciate ligament reamer was used to make a channel for the fibular allograft. Then, a femoral ring allograft was placed in the disc space at L4-5, and standard anterior lumbar interbody fusions were performed at any additional cephalad level(s). Afterward, posterior instrumented fusion was performed to complement the anterior fusion procedure (except at L5), and wide decompression followed.

RESULTS

All patients presented with isthmic spondylolisthesis and all had multilevel fusions. The mean slip angle was 32.6 degrees (37.8 degrees preoperatively), and mean lumbar index was 67%. After the procedure, the average endplate-to-dowel angle was 107.1 degrees compared with 134 degrees. All patients had clinical and radiographic evidence of solid fusion without the need for revisions.

CONCLUSION

The proposed advantage of our modified technique is twofold. The graft is placed nearly perpendicular to the L5-S1 interface, as it will behave more efficiently with respect to interfragmental compression. Also, surgeons gain access to fuse L4-5 anteriorly and posteriorly.

摘要

背景

传统的治疗峡部裂性脊柱滑脱的技术是通过 L5 体的前部分穿过腓骨栓钉来穿过 L5-S1 椎间盘。

目的

介绍一种治疗成人多节段退行性椎间盘疾病伴峡部裂性脊柱滑脱的技术。我们改良的技术允许我们通过 L4-5 椎间盘间隙穿过 L5-S1 椎间盘,从而同时治疗 L4-5 退变的椎间盘。

方法

在 L4-5 行标准前路椎间盘切除术。使用双平面透视,将克氏针从前三分之一的 L5 上终板开始,止于 S1。用前交叉韧带锉刀制作腓骨移植物的通道。然后,将股骨环同种异体移植物放置在 L4-5 的椎间盘间隙中,并在任何额外的头侧水平进行标准前路腰椎体间融合。随后,进行后路器械融合以补充前路融合术(除 L5 外),并进行广泛减压。

结果

所有患者均表现为峡部裂性脊柱滑脱,均行多节段融合。平均滑脱角度为 32.6 度(术前为 37.8 度),平均腰椎指数为 67%。手术后,终板-栓钉角平均为 107.1 度,而术前为 134 度。所有患者均有临床和影像学证据表明融合牢固,无需翻修。

结论

我们改良技术的优势有两点。移植物与 L5-S1 界面几乎垂直放置,因为它在节段间压缩方面的效率更高。此外,外科医生可以从前路和后路融合 L4-5。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验