Department of Civil and Environmental Engineering, Virginia Tech, Blacksburg, VA 24061, USA.
J Air Waste Manag Assoc. 2010 Jul;60(7):770-81. doi: 10.3155/1047-3289.60.7.770.
Silver nanoparticles (AgNPs) are gaining attention from the academic and regulatory communities, not only because of their antimicrobial effects and subsequent product applications, but also because of their potential health and environmental risks. Whereas AgNPs in the aqueous phase are under intensive study, those in the atmosphere have been largely overlooked, although it is well established that inhalation of nanoparticles is associated with adverse health effects. This review summarizes the present state of knowledge concerning airborne AgNPs to shed light on the possible environmental exposure scenarios that may accompany the production and popularization of silver nanotechnology consumer products. The current understanding of the toxicity of AgNPs points toward a potential threat via the inhalation exposure route. Nanoparticle size, chemical composition, crystal structure, surface area, and the rate of silver ion release are expected to be important variables in determining toxicity. Possible routes of aerosolization of AgNPs from the production, use, and disposal of existing consumer products are presented. It is estimated that approximately 14% of silver nanotechnology products that have been inventoried could potentially release silver particles into the air during use, whether through spraying, dry powder dispersion, or other methods. In laboratory and industrial settings, six methods of aerosolization have been used to produce airborne AgNPs: spray atomization, liquid-flame spray, thermal evaporation-condensation, chemical vaporization, dry powder dispersion, and manual handling. Fundamental uncertainties remain about the fate of AgNPs in the environment, their short- and long-term health effects, and the specific physical and chemical properties of airborne particles that are responsible for health effects. Thus, to better understand the risks associated with silver nanotechnology, it is vital to understand the conditions under which AgNPs could become airborne.
纳米银颗粒(AgNPs)不仅因其抗菌效果及其随后的产品应用而受到学术界和监管机构的关注,还因其潜在的健康和环境风险而受到关注。虽然水相中的 AgNPs 受到了深入研究,但大气中的 AgNPs 却在很大程度上被忽视了,尽管众所周知,吸入纳米颗粒会对健康造成不良影响。本综述总结了目前关于空气中 AgNPs 的知识状况,以期阐明伴随银纳米技术消费品生产和普及可能出现的环境暴露情景。目前对 AgNPs 毒性的认识表明,通过吸入暴露途径可能存在潜在威胁。纳米颗粒的大小、化学成分、晶体结构、表面积和银离子释放率预计将是决定毒性的重要变量。提出了从现有消费品的生产、使用和处置过程中气溶胶化 AgNPs 的可能途径。据估计,已经列出的大约 14%的银纳米技术产品在使用过程中可能会通过喷雾、干粉分散或其他方法将银颗粒释放到空气中,无论是通过喷雾、干粉分散还是其他方法。在实验室和工业环境中,已经使用六种气溶胶化方法来生产空气中的 AgNPs:喷雾雾化、液体火焰喷雾、热蒸发-冷凝、化学气相蒸发、干粉分散和手动处理。AgNPs 在环境中的归宿、其短期和长期健康影响以及导致健康影响的空气传播颗粒的具体物理和化学特性仍存在基本不确定性。因此,为了更好地了解与银纳米技术相关的风险,了解 AgNPs 可能成为空气传播颗粒的条件至关重要。