School of Medicine, Stanford University, Palo Alto, CA 94305, USA.
Spine J. 2011 Jan;11(1):54-63. doi: 10.1016/j.spinee.2010.09.024.
Osteoporosis is a major health-care problem that is increasing in magnitude with the aging population. Such patients are more prone to develop painful and debilitating spinal deformities but are difficult to treat. Currently, no definitive treatment algorithm has been established.
To review the failure modes of instrumentation and novel surgical treatments of spinal deformities in patients with osteoporosis with the goal of improving surgical care.
STUDY DESIGN/SETTING: Review article.
We systematically searched PubMed for articles regarding instrumentation failure modes and surgical treatments of spinal deformities in patients with osteoporosis and summarized current treatment options.
The surgical treatment options are severely limited because of the tendency for instrument failure secondary to pullout and subsidence, leading to revision procedures; multiple levels and multiple fixation points are recommended to minimize the risk. The literature supports the use of vertebroplasty in conjunction with pedicle screw-based instrumentation for treating more severe spinal deformities. Other techniques and modifications with evidence of reduced failure risk are bicortical screws, hydroxyapatite coatings, double screws, and expandable screws. Anterior approaches may provide another avenue of treatment, but only a few studies have been conducted on these implants in patients with osteoporosis.
Spinal deformities in patients with osteoporosis are difficult to treat because of their debilitating and progressive nature. Novel surgical approaches and instruments have been designed to decrease construct failures in this patient population by reducing implant pullout, subsidence, and incidence of revision surgery. The success of these techniques depends on integrating biomaterial, biologic, and biomechanical aspects with clinical considerations. Synthesizing this myriad of aspects will lead to improved treatment options for patients with osteoporosis who are suffering from spinal deformities.
骨质疏松症是一个日益严重的医疗保健问题,随着人口老龄化而不断加剧。此类患者更容易出现疼痛和使人虚弱的脊柱畸形,但治疗难度较大。目前,尚未确立明确的治疗方案。
综述骨质疏松症患者脊柱畸形的器械失败模式和新的手术治疗方法,以改善手术治疗效果。
研究设计/设置:综述文章。
我们系统地在 PubMed 上检索了有关骨质疏松症患者脊柱畸形器械失败模式和手术治疗的文章,并总结了当前的治疗选择。
由于器械拔出和下沉导致的器械失败倾向,手术治疗选择受到严重限制,需要进行翻修手术;建议采用多个节段和多个固定点,以最大限度地降低风险。文献支持在椎弓根螺钉固定器械的基础上联合使用椎体成形术治疗更严重的脊柱畸形。其他具有降低失败风险证据的技术和改良方法包括双皮质螺钉、羟基磷灰石涂层、双螺钉和可扩张螺钉。前路方法可能提供另一种治疗途径,但在骨质疏松症患者中,这些植入物的研究很少。
骨质疏松症患者的脊柱畸形因其使人虚弱和进行性的特点而难以治疗。为了降低器械失效风险,包括器械拔出、下沉和翻修手术,设计了新的手术方法和器械。这些技术的成功取决于将生物材料、生物学和生物力学方面与临床考虑因素相结合。综合这些方面将为患有脊柱畸形的骨质疏松症患者提供更好的治疗选择。