Division of Neuroradiology, Lund University, Diagnostic Centre for Imaging and Functional Medicine, Skåne University Hospital, Sweden.
Acta Orthop. 2011 Feb;82(1):50-5. doi: 10.3109/17453674.2010.548032. Epub 2010 Dec 29.
There are no reports in the literature on the influence of learning on the pedicle screw insertion. We studied the effect of learning on the rate of screw misplacement in patients with adolescent idiopathic scoliosis treated with segmental pedicle screw fixation.
We retrospectively evaluated low-dose spine computed tomography of 116 consecutive patients (aged 16 (12-24) years, 94 females) who were operated during 4 periods over 2005-2009 (group 1: patients operated autumn 2005-2006; group 2: 2007; group 3: 2008; and group 4: 2009). 5 types of misplacement were recorded: medial cortical perforation, lateral cortical perforation, anterior cortical perforation of the vertebral body, endplate perforation, and perforation of the neural foramen.
2,201 pedicle screws were evaluated, with an average of 19 screws per patient. The rate of screw misplacement for the whole study was 14%. The rate of lateral and medial cortical perforation was 7% and 5%. There was an inverse correlation between the occurrence of misplacement and the patient number, i.e. the date of operation (r = -0.35; p < 0.001). The skillfulness of screw insertion improved with reduction of the rate of screw misplacement from 20% in 2005-2006 to 11% in 2009, with a breakpoint at the end of the first study period (34 patients).
We found a substantial learning curve; cumulative experience may have contributed to continued reduction of misplacement rate.
目前尚无文献报道学习对椎弓根螺钉置入的影响。我们研究了学习对青少年特发性脊柱侧凸行节段性椎弓根螺钉固定治疗患者螺钉错位率的影响。
我们回顾性评估了 2005 年至 2009 年间连续 116 例(年龄 16(12-24)岁,94 例女性)接受低剂量脊柱 CT 检查的患者。4 个时间段进行手术(2005-2006 年秋季为第 1 组;2007 年为第 2 组;2008 年为第 3 组;2009 年为第 4 组)。记录了 5 种类型的螺钉位置不良:内侧皮质穿孔、外侧皮质穿孔、椎体前缘皮质穿孔、终板穿孔和神经孔穿孔。
共评估了 2201 枚椎弓根螺钉,平均每位患者 19 枚螺钉。整个研究中螺钉位置不良的发生率为 14%。外侧和内侧皮质穿孔的发生率分别为 7%和 5%。螺钉位置不良的发生率与患者数量呈负相关,即手术日期(r = -0.35;p < 0.001)。随着螺钉位置不良率从 2005-2006 年的 20%降至 2009 年的 11%,螺钉插入技术的熟练程度有所提高,在第一个研究期间结束时(34 例)出现了转折点。
我们发现存在一个显著的学习曲线;累积经验可能有助于继续降低螺钉位置不良率。