Suppr超能文献

评估髋关节被动僵硬程度的临床测试的有效性和可靠性。

Validity and reliability of clinical tests for assessing hip passive stiffness.

作者信息

Carvalhais Viviane Otoni do Carmo, de Araújo Vanessa Lara, Souza Thales Rezende, Gonçalves Gabriela Gomes Pavan, Ocarino Juliana de Melo, Fonseca Sérgio Teixeira

机构信息

Department of Physical Therapy, Universidade Federal de Minas Gerais, Av. Presidente Antônio Carlos, 6627 Campus Pampulha, Belo Horizonte, CEP 31270-901, MG, Brazil.

出版信息

Man Ther. 2011 Jun;16(3):240-5. doi: 10.1016/j.math.2010.10.009. Epub 2011 Jan 5.

Abstract

Inadequate levels of hip passive joint stiffness have been associated with the occurrence of movement dysfunction, development of pathologies and reduction in performance. Clinical tests, designed to evaluate hip joint stiffness, may allow the identification of improper stiffness levels. The purpose of this study was to determine the concurrent validity as well as the intra- and inter-examiners reliabilities of clinical measures used to assess hip passive stiffness during internal rotation. Fifteen healthy participants were subjected to test-retest evaluations by two examiners. Two clinical measures were performed: 'position of first detectable resistance' and 'change in passive resistance torque'. The results of these tests were compared to the passive stiffness measured with an isokinetic dynamometer (gold standard measure). A significant correlation was found between the stiffness measured with the isokinetic dynamometer and the clinical measures of 'position of first detectable resistance' (r=-0.85 to -0.86, p<0.001) and 'change in passive resistance torque' (r=0.78 to 0.84, p≤0.001). The Intraclass Correlation Coefficients for intra- and inter-examiners reliabilities varied from 0.95 to 0.99. Thus, the results demonstrated that the clinical measures have adequate validity and reliability for obtaining information on hip passive stiffness during internal rotation.

摘要

髋关节被动关节僵硬度不足与运动功能障碍的发生、病理发展及运动表现下降有关。旨在评估髋关节僵硬度的临床测试可能有助于识别不适当的僵硬度水平。本研究的目的是确定用于评估内旋过程中髋关节被动僵硬度的临床测量方法的同时效度以及检查者内和检查者间的可靠性。15名健康参与者接受了两名检查者的重测评估。进行了两项临床测量:“首次可检测到阻力的位置”和“被动阻力扭矩变化”。将这些测试结果与用等速测力计测量的被动僵硬度(金标准测量)进行比较。发现等速测力计测量的僵硬度与“首次可检测到阻力的位置”(r = -0.85至-0.86,p < 0.001)和“被动阻力扭矩变化”(r = 0.78至0.84,p≤0.001)的临床测量之间存在显著相关性。检查者内和检查者间可靠性的组内相关系数在0.95至0.99之间。因此,结果表明临床测量方法在获取内旋过程中髋关节被动僵硬度信息方面具有足够的效度和可靠性。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验