Suppr超能文献

紫杉醇涂层球囊导管在猪冠状动脉过度拉伸和支架植入模型中的剂量反应。

Dose response to Paclitaxel-coated balloon catheters in the porcine coronary overstretch and stent implantation model.

机构信息

Department of Radiology, Charité, Humboldt University Berlin, Berlin, Germany.

出版信息

Invest Radiol. 2011 Apr;46(4):255-63. doi: 10.1097/RLI.0b013e31820577df.

Abstract

OBJECTIVE

There is little published information regarding the efficacy of paclitaxel-coated balloon catheters except for the iopromide-containing formulation, and less is known about the kind of toxicity at overdose. The aim of our study was to assess 2 different paclitaxel matrix formulations on angioplasty balloon catheters in vitro, with respect to pharmacokinetics, and efficacy and tolerance to determine the minimum effective dose and local toxicity at extremely high dose which is only achieved in experimental studies.

METHODS AND MATERIALS

Adherence of coatings was tested in vitro in dry state and during passage through hemostatic valves, guiding catheters, and blood. Drug release, transfer to the vessel wall during coronary angioplasty, inhibition of neointimal proliferation, and tolerance were investigated in swine. Efficacy and tolerance of balloons were examined for doses ranging from 1 to 9 μg/mm2 and 3 overlapping applications of balloons coated with 3 times the regular dose of 3 μg/mm2. Paclitaxel concentrations were determined by high performance liquid chromatography, efficacy and tolerance by vital signs, clinical observation, quantitative coronary angiography, and histomorphometry 4 weeks after implanting premounted bare stents in coronary arteries applying 1:1.2 overstretch.

RESULTS

Under worst-case conditions, drug loss on the way through the guiding catheter and blood was in the range of 30%. After inflation of balloons coated with the clinically tested dose of 3 μg/mm2 in a coronary artery about 10% of drug remained on balloons, 20% to 30% was taken up into the vessel wall (∼200 μg). Neointimal area on cross sections was 6.8 ± 2.2 mm2 (uncoated control); 3.1 ± 1.1 mm2 (iopromide-matrix) and 3.0 ± 0.5 mm2 (urea-matrix) at 1 μg/mm2; 2.0 ± 0.4 mm2 versus 1.7 ± 1.1 mm2 at 3 μg/mm2 with no further decrease at higher doses. Thrombotic occlusions were observed in 3 of 15 vessel segments treated with overlapping inflations of 3 high-dose balloons but without any signs of aneurysms.

CONCLUSION

In the animal model, 2 paclitaxel matrix formulations were similar in respect of uptake in the vessel wall, and effective already at a dose of 1 μg/mm2. Except thrombotic events for the intentionally excessive dose, paclitaxel-coated balloons were well tolerated in the animal model.

摘要

目的

紫杉醇涂层球囊导管的疗效信息除了碘普罗胺制剂以外很少有报道,而且关于过量毒性的信息也知之甚少。我们的研究目的是评估两种不同的紫杉醇基质制剂在血管成形术球囊导管上的药代动力学、疗效和耐受性,以确定最小有效剂量和极高剂量(仅在实验研究中达到)下的局部毒性。

方法和材料

在体外干燥状态下和通过止血瓣、引导导管和血液中进行涂层附着性测试。在猪中研究药物释放、在冠状动脉成形术中转移到血管壁、抑制新生内膜增殖和耐受性。在 1 至 9 μg/mm2 的剂量范围内以及用 3 倍于 3 μg/mm2 的常规剂量的 3 次重叠应用涂有球囊的情况下,检查球囊的疗效和耐受性。通过高效液相色谱法测定紫杉醇浓度,通过生命体征、临床观察、定量冠状动脉造影和 4 周后植入预载裸支架后在冠状动脉中 1:1.2 过度伸展来进行疗效和耐受性评估。

结果

在最坏的情况下,在通过引导导管和血液的过程中药物损失范围为 30%。在冠状动脉中充气涂有临床测试剂量 3 μg/mm2 的球囊后,约有 10%的药物残留在球囊上,20%至 30%的药物被吸收到血管壁中(约 200 μg)。横截面的新生内膜面积为 6.8 ± 2.2 mm2(未涂覆的对照);1 μg/mm2 时为 3.1 ± 1.1 mm2(碘普罗胺基质)和 3.0 ± 0.5 mm2(脲基质);3 μg/mm2 时为 2.0 ± 0.4 mm2,与 1.7 ± 1.1 mm2 相比无进一步下降。在用 3 个高剂量球囊重叠充气治疗的 15 个血管段中有 3 个出现血栓闭塞,但没有任何动脉瘤迹象。

结论

在动物模型中,两种紫杉醇基质制剂在血管壁摄取方面相似,并且在 1 μg/mm2 的剂量时已经有效。除了故意过量剂量的血栓形成事件外,紫杉醇涂层球囊在动物模型中具有良好的耐受性。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验