Gao Peng, Yao Baoli, Harder Irina, Min Junwei, Guo Rongli, Zheng Juanjuan, Ye Tong
State Key Laboratory of Transient Optics and Photonics, Xi'an Institute of Optics and Precision Mechanics, Chinese Academy of Sciences, Xi'an 710119, China.
J Opt Soc Am A Opt Image Sci Vis. 2011 Mar 1;28(3):434-40. doi: 10.1364/JOSAA.28.000434.
An optical configuration for parallel two-step phase-shifting digital holographic microscopy (DHM) based on a grating pair is proposed for the purpose of real-time phase microscopy. Orthogonally circularly polarized object and reference waves are diffracted twice by a pair of gratings, and two parallel copies for each beams come into being. Combined with polarization elements, parallel two-step phase-shifting holograms are obtained. Based on the proposed configuration, two schemes of DHM, i.e., slightly off-axis and on-axis DHM, have been implemented. The slightly off-axis DHM suppresses the dc term by subtracting the two phase-shifting holograms from each other, thus the requirement on the off-axis angle and sampling power of the CCD camera is reduced greatly. The on-axis DHM has the least requirement on the resolving power of the CCD camera, while it requires that the reference wave is premeasured and its intensity is no less than 2 times the maximal intensity of the object wave.
为实现实时相显微镜,提出了一种基于光栅对的并行两步相移数字全息显微镜(DHM)的光学配置。正交圆偏振的物波和参考波被一对光栅衍射两次,每束光产生两个并行副本。结合偏振元件,获得并行两步相移全息图。基于所提出的配置,实现了两种DHM方案,即微离轴DHM和同轴DHM。微离轴DHM通过将两个相移全息图相互相减来抑制直流项,从而大大降低了对离轴角和CCD相机采样功率的要求。同轴DHM对CCD相机的分辨能力要求最低,同时要求预先测量参考波,其强度不小于物波最大强度的2倍。