School of Science, Monash University, P.O. Box 8975, 46780 Kelana Jaya, Selangor, Malaysia.
Appl Environ Microbiol. 2011 Jun;77(11):3757-64. doi: 10.1128/AEM.01415-10. Epub 2011 Apr 8.
Bacterial attachment onto materials has been suggested to be stochastic by some authors but nonstochastic and based on surface properties by others. We investigated this by attaching pairwise combinations of two Salmonella enterica serovar Sofia (S. Sofia) strains (with different physicochemical and attachment properties) with one strain each of S. enterica serovar Typhimurium, S. enterica serovar Infantis, or S. enterica serovar Virchow (all with similar physicochemical and attachment abilities) in ratios of 0.428, 1, and 2.333 onto glass, stainless steel, Teflon, and polysulfone. Attached bacterial cells were recovered and counted. If the ratio of attached cells of each Salmonella serovar pair recovered was the same as the initial inoculum ratio, the attachment process was deemed stochastic. Experimental outcomes from the study were compared to those predicted by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory. Significant differences (P < 0.05) between the initial and the attached ratios for serovar pairs containing S. Sofia S1296a for all different ratios were apparent for all materials. For S. Sofia S1635-containing pairs, 7 out of 12 combinations of serovar pairs and materials had attachment ratios not significantly different (P > 0.05) from the initial ratio of 0.428. Five out of 12 and 10 out of 12 samples had attachment ratios not significantly different (P > 0.05) from the initial ratios of 1 and 2.333, respectively. These results demonstrate that bacterial attachment to different materials is likely to be nonstochastic only when the key physicochemical properties of the bacteria were significantly different (P < 0.05) from each other. XDLVO theory could successfully predict the attachment of some individual isolates to particular materials but could not be used to predict the likelihood of stochasticity in pairwise attachment experiments.
一些作者认为细菌附着在材料上是随机的,但另一些作者则认为细菌附着是非随机的,并且取决于表面特性。我们通过将两种不同物理化学和附着特性的肠炎沙门氏菌血清型 Sofia (S. Sofia) 菌株与每种菌株各一株肠炎沙门氏菌血清型 Typhimurium、肠炎沙门氏菌血清型 Infantis 或肠炎沙门氏菌血清型 Virchow(所有这些菌株具有相似的物理化学和附着能力)以 0.428、1 和 2.333 的比例组合,分别附着在玻璃、不锈钢、铁氟龙和聚砜上,来研究这一现象。回收附着的细菌细胞并进行计数。如果每个肠炎沙门氏菌血清型对回收的附着细胞的比例与初始接种物的比例相同,则认为附着过程是随机的。将研究的实验结果与扩展的 Derjaguin-Landau-Verwey-Overbeek (XDLVO) 理论进行比较。对于包含 S. Sofia S1296a 的血清型对,对于所有不同的比例,所有材料的初始和附着比例之间都存在明显差异(P < 0.05)。对于包含 S. Sofia S1635 的血清型对,在 12 种血清型对和材料的组合中,有 7 种组合的附着比例与初始比例 0.428 没有显著差异(P > 0.05)。12 个样本中有 5 个和 12 个样本的附着比例与初始比例 1 和 2.333 没有显著差异(P > 0.05)。这些结果表明,只有当细菌的关键物理化学特性彼此之间有显著差异(P < 0.05)时,细菌附着在不同材料上才可能是非随机的。XDLVO 理论可以成功预测某些分离株对特定材料的附着,但不能用于预测成对附着实验中随机性的可能性。