Zimmerman M C, Meunier A, Katz J L, Christel P
Department of Orthopaedic Surgery, University of Medicine and Dentistry of New Jersey, Newark 07103.
IEEE Trans Biomed Eng. 1990 May;37(5):433-41. doi: 10.1109/10.55634.
Total hip arthroplasty causes biomechanical changes in the normal femur including a redistribution and concentration of stress. These mechanical alterations in the femur cause local remodeling and resorption that affect the geometry and mechanical properties of the bone. Three complementary techniques were used to study the local adaptive remodeling of bone due to prosthesis implantation. A graphics package was used to obtain section geometrical information, an ultrasonic wave propagation technique to determine elastic properties, and a new scanning acoustic microscope (SAM) to map the acoustic impedance profile of each section. The effects of the implantation of two different types of hip prostheses were investigated, an uncemented bipolar prosthesis with an Austin-Moore type stem and a cemented Charnley prosthesis. Prosthesis implantation resulted in an increase in cortical area and mediolateral diameter and a decrease in anterio-posterior diameter. Both prostheses had a detrimental effect on local elastic properties as determined by acoustic velocity measurements. Finally, the SAM system provided information about local inhomogeneities in bone properties not obtainable by any other means. The acoustic impedance maps highlighted bone resorption and bone remodeling on a microstructural level.
