Department of Laboratory Medicine, Asahikawa Medical University, Asahikawa, Hokkaido, Japan.
Clin Chim Acta. 2012 Jan 18;413(1-2):175-81. doi: 10.1016/j.cca.2011.09.016. Epub 2011 Sep 22.
International external quality assessments have shown variation in results of urinary albumin among various immunoassays. A well-defined candidate reference material for urine albumin (cRM-UA) was prepared to improve standardization.
cRM-UA was prepared from a commercially available preparation of human serum albumin by using gel-filtration HPLC. The value was assigned by transfer from ERM-DA470 using immunoassay systems qualified based on the linearity and variability observed in dilution tests of pooled urine and the calibrators. Effectiveness of recalibration using the cRM-UA was evaluated by measuring 129 urine specimens.
The cRM-UA had a monomeric albumin peak which accounted for 98.9% of the total area by gel filtration HPLC. The lyophilized preparation of the cRM-UA had suitable homogeneity, and short- and long-term stability. Nine of 14 immunoassays met the criteria were used for value assignment. The assigned concentration was 225.1±9.11 mg/l [mean±U: expanded uncertainty with k=2] when reconstituted with 3.00 ml of purified water on weight basis. Recalibration of 7 qualified immunoassays using the cRM-UA resulted in between-method CV of 6.6%.
The cRM-UA was successful in achieving standardization of urine albumin results among 7 immunoassays which possess performance attributes representing uniform reactivity to both cRM-UA and clinical urine samples.
国际外部质量评估显示,各种免疫分析方法检测尿白蛋白的结果存在差异。为了改善标准化,我们制备了一种明确的候选参考物质尿白蛋白(cRM-UA)。
通过凝胶过滤 HPLC 从市售的人血清白蛋白制剂中制备 cRM-UA。通过免疫分析系统从 ERM-DA470 转移赋值,这些系统基于在混合尿液的稀释试验和校准品中观察到的线性和变异性进行了资格认证。通过测量 129 个尿液标本评估使用 cRM-UA 重新校准的效果。
cRM-UA 通过凝胶过滤 HPLC 具有单体白蛋白峰,占总面积的 98.9%。冻干的 cRM-UA 制剂具有合适的均一性、短期和长期稳定性。9 种符合标准的 14 种免疫分析方法用于赋值。当按重量用 3.00 毫升纯化水重溶时,分配的浓度为 225.1±9.11mg/l[平均值±U:k=2 时的扩展不确定度]。使用 cRM-UA 对 7 种合格的免疫分析方法进行重新校准,得到的组间 CV 为 6.6%。
cRM-UA 成功地实现了 7 种免疫分析方法之间的尿白蛋白结果标准化,这些方法具有代表对 cRM-UA 和临床尿液样本均具有均匀反应性的性能特征。