CBQF/Escola Superior de Biotecnologia, Universidade Católica Portuguesa, Porto, Portugal.
Anal Chim Acta. 2012 Feb 17;715:57-63. doi: 10.1016/j.aca.2011.12.002. Epub 2011 Dec 9.
In this work, the coupling of a commercial monolithic column to a traditional low pressure FIA system is proposed for the analysis of theobromine, theophylline and caffeine in coffee brewed samples using UV detection. The parameters mobile phase composition, flow rate and loop volume were evaluated and discussed considering the various chromatographic parameters in order to enable resolution of the methylxanthines studied within the coffee brewed sample matrix. The analyses of methylxanthines in coffee brewed samples by the proposed methodology were in good agreement with those obtained by the reference procedure based on HPLC. Relative errors were below 6% for all samples analyzed. Detection limits in the selected experimental conditions were within 10(-6)M range for theobromine and theophylline, and 10(-5) M for caffeine. The determination rate of the three methylxanthines for coffee brewed samples was ca of 10 h(-1). The main advantage of the proposed flow system was the possibility to perform chromatographic separations in low pressure flow systems. This substantial improvement was achieved due to the compatibility of monolithic columns within the flow injection system surpassing in this way one of the main handicaps of traditional flow analysis systems. Additional features of the strategy presented were low cost, efficiency, high versatility and low reagent consumption comparing to HPLC methodologies usually followed in the case study herein presented.
在这项工作中,提出了将商业整体柱与传统低压流动注射分析(FIA)系统耦合,用于使用 UV 检测分析冲泡咖啡样品中的可可碱、茶碱和咖啡因。考虑到各种色谱参数,评估和讨论了流动相组成、流速和环体积等参数,以便在咖啡冲泡样品基质中实现研究的甲基黄嘌呤的分离。所提出的方法用于分析冲泡咖啡样品中的甲基黄嘌呤,与基于 HPLC 的参考方法得到的结果非常吻合。对于所有分析的样品,相对误差均低于 6%。在选定的实验条件下,检测限在可可碱和茶碱的 10(-6)M 范围内,咖啡因的检测限为 10(-5)M。对于冲泡咖啡样品,三种甲基黄嘌呤的测定速率约为 10 h(-1)。所提出的流动系统的主要优点是能够在低压流动系统中进行色谱分离。这种实质性的改进是由于整体柱在流动注射系统中的兼容性实现的,从而克服了传统流动分析系统的主要障碍之一。与本文所述案例中通常采用的 HPLC 方法相比,该策略的其他特点是成本低、效率高、多功能性强、试剂消耗低。