Department of Orthopaedic Surgery, Clinique d’Eich, Centre Hospitalier de Luxembourg, 78, rue d’Eich, 1460 Luxembourg, Luxembourg.
Knee Surg Sports Traumatol Arthrosc. 2013 Jan;21(1):127-33. doi: 10.1007/s00167-012-1913-x.
Biplanar open-wedge high tibial osteotomy (HTO) is thought to promote rapid bone healing due to the increased cancellous bone surface compared to other HTO techniques. However, precise data on the bone surface area and wedge volume resulting from both open- and closed-wedge HTO techniques remain unknown. We hypothesized that biplanar rather than uniplanar HTO better reflects the ideal geometrical requirements for bone healing, representing a large cancellous bone surface combined with a small wedge volume.
Tibial saw bones were assigned to 4 different groups of valgisation high tibial osteotomies: group 1: open-wedge uniplanar HTO; group 2: open-wedge biplanar HTO with ascending frontal cut; group 3: open-wedge biplanar HTO with descending frontal cut (retrotubercule osteotomy technique), and group 4: closed-wedge uniplanar HTO. Bone surface areas of all osteotomy planes were quantified. Wedge volumes were determined using a prism-based algorithm, applying standardized wedge heights of 5, 10, and 15 mm.
The open-wedge biplanar osteotomy with a descending frontal cut (group 3) created significantly larger bone surfaces compared to the “classic” biplanar technique with an ascending frontal cut (group 2) and compared to all uniplanar techniques. Bone surfaces after the classic open-wedge technique (group 2) were slightly larger compared to all uniplanar techniques (group 1 and 4). No significant differences of wedge volumes were found between the retrotubercle (group 3) and classic open-wedge techniques (group 2). Wedge volumes were significantly higher in the uniplanar open-wedge technique (group 1) compared to the biplanar open-wedge techniques (group 2 and 3).
Bone geometry following HTO suggests that the biplanar open-wedge techniques simultaneously create smaller wedge volumes and larger bone surface areas compared to the uniplanar open-wedge techniques. The relatively neglected closed-wedge technique still offers in theory the best healing potential, characterized by an almost absent wedge volume and a large bone-to-bone contact area. Although this idealized geometric view on bony geometry excludes all biologic factors that influence bone healing, the current data suggest a general rule for the applied standard osteotomy techniques and all of their surgical modifications: reducing the amount of slow gap healing and simultaneously increasing the area of faster contact healing may be beneficial for osteotomy healing. Thus, a biplanar rather than a uniplanar osteotomy may be performed for high tibial osteotomy in clinical practice.
与其他胫骨高位截骨术 (HTO) 技术相比,双平面开放式楔形胫骨高位截骨术 (HTO) 被认为可以促进更快的骨愈合,因为它增加了松质骨表面。然而,关于开放式和闭合式楔形 HTO 技术所产生的骨表面积和楔形体积的确切数据仍不清楚。我们假设双平面 HTO 比单平面 HTO 更好地反映了骨愈合的理想几何要求,代表了较大的松质骨表面与较小的楔形体积相结合。
将胫骨锯骨分配到 4 个不同的外翻胫骨高位截骨术组:组 1:开放式楔形单平面 HTO;组 2:采用前向升支截骨的开放式楔形双平面 HTO;组 3:采用前向降支截骨的开放式楔形双平面 HTO(Retrotubercule 截骨技术),组 4:闭合式楔形单平面 HTO。对所有截骨面的骨表面积进行量化。使用基于棱柱的算法确定楔形体积,采用标准化楔形高度 5、10 和 15mm。
与“经典”采用前向升支截骨的双平面技术(组 2)相比,采用前向降支截骨的开放式楔形双平面截骨术(组 3)产生的骨表面明显更大,与所有单平面技术相比也是如此。经典开放式楔形技术(组 2)后的骨表面略大于所有单平面技术(组 1 和 4)。在 Retro-tubercule(组 3)和经典开放式楔形技术(组 2)之间未发现楔形体积的显着差异。与双平面开放式楔形技术(组 2 和 3)相比,单平面开放式楔形技术(组 1)的楔形体积显着更高。
HTO 后的骨几何形状表明,与单平面开放式楔形技术相比,双平面开放式楔形技术同时产生较小的楔形体积和较大的骨表面积。相对被忽视的闭合式楔形技术在理论上仍具有最佳的愈合潜力,其特点是几乎不存在楔形体积和较大的骨对骨接触面积。尽管这种对骨几何形状的理想化观点排除了影响骨愈合的所有生物学因素,但目前的数据表明了应用标准截骨术技术及其所有手术修改的一般规则:减少缓慢间隙愈合的量,同时增加更快接触愈合的面积可能有利于截骨愈合。因此,在临床实践中,胫骨高位截骨术可以进行双平面而不是单平面截骨。