Plante S, van den Brand M, van Veen L C, Di Mario C, Essed C E, Beatt K J, Serruys P W
Thoraxcenter (Catheterization Laboratory), Erasmus University, Rotterdam, The Netherlands.
Int J Card Imaging. 1990;5(4):249-60. doi: 10.1007/BF01797842.
In order to evaluate the relation between balloon design (monofoil, trefoil) and valvular configuration, experimental aortic valvuloplasty was performed in four post-mortem hearts with calcific aortic stenosis of various morphology. The degree of obstruction of the aortic orifice was assessed by computed axial tomography during inflation of monofoil 15 and 19 mm and trefoil 3 x 12 mm balloon catheters. We also evaluated the hemodynamic repercussion of balloon inflation (fall in systolic aortic pressure) in four elderly patients with acquired aortic stenosis who underwent a percutaneous transluminal aortic balloon valvuloplasty, with stepwise increasing balloon sizes of 15 mm, 19 mm and 3 x 12 mm, as during our in vitro experiments, and who underwent aortic valve replacement later on. In these patients, we correlated the anatomy of the excised aortic valves with the retrospective analysis of aortic pressure curves recorded during previous valvuloplasty procedures. Our experimental and clinicopathological observations showed that the degree of obstruction of the aortic orifice in post-mortem specimens and the tolerance to balloon inflation in live patients are dependent of the valvular configuration. Although trefoil balloons have the theoretical advantage to avoid complete obstruction of the aortic orifice during inflation, we observed that in presence of a tricuspid configuration, they could be potentially more occlusive than monofoil balloons since each of the 3 individual components of the trefoil balloon occupied the intercommissural spaces while inflated. However, they offered more residual free space when inflated in aortic valves with a bicuspid configuration (i.e. congenitally bicuspid valves or tricuspid valves with one fused commissure). In our opinion, these observations are relevant, since degenerative disease of the aortic valve (i.e. tricuspid valve without commissural fusion) is now recognized as the most common etiology of aortic stenosis in the elderly.
为了评估球囊设计(单叶、三叶)与瓣膜形态之间的关系,我们在4个具有不同形态钙化性主动脉瓣狭窄的尸检心脏上进行了实验性主动脉瓣成形术。在使用15毫米和19毫米单叶球囊导管以及3×12毫米三叶球囊导管充气过程中,通过计算机断层扫描评估主动脉口的阻塞程度。我们还评估了4例患有后天性主动脉瓣狭窄且接受经皮经腔主动脉球囊瓣膜成形术的老年患者球囊充气的血流动力学影响(收缩期主动脉压下降),如同我们在体外实验中那样逐步增加球囊尺寸至15毫米、19毫米和3×12毫米,并且这些患者随后接受了主动脉瓣置换术。在这些患者中,我们将切除的主动脉瓣的解剖结构与先前瓣膜成形术过程中记录的主动脉压力曲线的回顾性分析相关联。我们的实验和临床病理观察表明,尸检标本中主动脉口的阻塞程度以及活体患者对球囊充气的耐受性取决于瓣膜形态。尽管三叶球囊在理论上具有避免充气过程中主动脉口完全阻塞的优势,但我们观察到,在存在三尖瓣形态时,它们可能比单叶球囊更具阻塞性,因为三叶球囊的3个单独组件在充气时各自占据瓣叶间间隙。然而,当在具有二叶形态的主动脉瓣(即先天性二叶瓣或有一个融合瓣叶的三叶瓣)中充气时,它们提供了更多的残余自由空间。我们认为,这些观察结果具有相关性,因为现在公认主动脉瓣退行性疾病(即无瓣叶融合的三尖瓣)是老年人主动脉瓣狭窄最常见的病因。