Suppr超能文献

训练水平对初次全髋关节和膝关节置换术中数字模板准确性的影响。

Effect of training level on accuracy of digital templating in primary total hip and knee arthroplasty.

作者信息

Hsu Andrew R, Kim Jeffrey D, Bhatia Sanjeev, Levine Brett R

机构信息

Department of Orthopaedic Surgery, Rush University Medical Center, Chicago, Illinois, USA.

出版信息

Orthopedics. 2012 Feb 17;35(2):e179-83. doi: 10.3928/01477447-20120123-15.

Abstract

The use of digital radiography and templating software continues to become more prevalent in orthopedics as the number of total hip arthroplasty (THA) and total knee arthroplasty (TKA) procedures increases every year. The purpose of this study was to evaluate the effect of training level on the accuracy of digital templating for primary THA and TKA. Digital radiographs of 97 patients undergoing primary THA (49 cases) and TKA (48 cases) were retrospectively templated using OrthoView digital planning software (OrthoView LLC, Jacksonville, Florida). Anteroposterior hip and lateral knee radiographs were digitally templated and compared with the actual size of the implants used intraoperatively. An implant sales representative, physician assistant, medical student (J.D.K.), resident (A.R.H.), and fellowship-trained arthroplasty surgeon (B.R.L.) templated all cases independently after a standardized orientation and were blinded to the actual component sizes used for surgery. The medical student, resident, and arthroplasty surgeon retemplated the same 97 cases 1 month later to determine intraobserver reliability. Digital templating was accurate in predicting the correct implant size in 33% of THAs and 54% of TKAs. In 73% of THAs and 92% of TKAs, digital templating was within 1 size of the actual implant used, and in 88% of THAs and 99% of TKAs, templating was within 2 sizes of the final components. In no cases did the templated implant size vary by >3 sizes from the final components. Interobserver reliability for templating THAs and TKAs showed good reliability as measured by intraclass correlation coefficient (ICC) (ICC(THA)=.70; ICC(TKA)=.86). Intraobserver reliability for templating THAs had excellent reliability for the resident and arthroplasty surgeon, with a kappa coefficient (κ) of 0.92, and good reliability for the medical student (κ=0.78). Intraobserver reliability for templating TKAs showed excellent reliability among all examiners (κ=0.90).

摘要

随着全髋关节置换术(THA)和全膝关节置换术(TKA)手术数量逐年增加,数字X线摄影和模板软件在骨科领域的应用越来越普遍。本研究的目的是评估培训水平对初次THA和TKA数字模板准确性的影响。使用OrthoView数字规划软件(OrthoView LLC,佛罗里达州杰克逊维尔)对97例行初次THA(49例)和TKA(48例)患者的数字X线片进行回顾性模板分析。对前后位髋关节和侧位膝关节X线片进行数字模板分析,并与术中使用的植入物实际尺寸进行比较。一名植入物销售代表、医师助理、医学生(J.D.K.)、住院医师(A.R.H.)和接受过关节置换 fellowship培训的外科医生(B.R.L.)在经过标准化培训后独立对所有病例进行模板分析,且对手术中使用的实际假体组件尺寸不知情。医学生、住院医师和关节置换外科医生在1个月后对相同的97例病例重新进行模板分析,以确定观察者内可靠性。数字模板在33%的THA和54%的TKA中准确预测了正确的植入物尺寸。在73%的THA和92%的TKA中,数字模板与实际使用的植入物尺寸相差在1个尺寸以内,在88%的THA和99%的TKA中,模板与最终组件尺寸相差在2个尺寸以内。在所有病例中,模板植入物尺寸与最终组件的差异均未超过3个尺寸。通过组内相关系数(ICC)测量,THA和TKA模板分析的观察者间可靠性显示出良好的可靠性(ICC(THA)=.70;ICC(TKA)=.86)。THA模板分析的观察者内可靠性在住院医师和关节置换外科医生中具有出色的可靠性,kappa系数(κ)为0.92,医学生的可靠性良好(κ=0.78)。TKA模板分析的观察者内可靠性在所有检查者中均显示出出色的可靠性(κ=0.90)。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验