Institut de Ciència de Materials de Barcelona (ICMAB-CSIC), Campus de la U.A.B., 08193 Bellaterra, Spain.
Chemistry. 2012 Mar 12;18(11):3174-84. doi: 10.1002/chem.201102626. Epub 2012 Feb 14.
The influence of ethereal solvents (diethyl ether (Et(2)O), tetrahydrofuran (THF) or dimethoxyethane (DME)) on the formation of organolithiated compounds has been studied on the 1,2-C(2)B(10)H(12) platform. This platform is very attractive because it contains two C(c)-H adjacent units ready to be lithiated. On would expect that the closeness of both C(c)-H units would induce a higher resistance of the second C(c)-H unit being lithiated following the first lithiation. However, this is not the case, which makes 1,2-C(2)B(10)H(12) attractive to get a better understanding of the ethereal solvent influence on the lithiation process. The formation of carboranyl disubstituted species has been attributed to the existence of an equilibrium in which the carboranyl monolithiated species disproportionates into dilithium carborane and pristine carborane. The way Li(+) binds to C(c) in the carboranyl fragment and how the solvent stabilizes such a binding is paramount to drive the reaction to the generation of mono- and disubstituted carboranes. In fact, the proportion of mono- and disubstituted species is a consequence of the formation of contact ion pairs and, to a lesser extent, of separated ion pairs in ethereal solvents. All ethereal solvents generate contact ion pairs in which a large degree of covalent C(c)-Li(solvent) bonding can be assumed, according to experimental and theoretical data. Furthermore, Et(2)O tends to produce carboranyllitium ion pairs with a higher degree of contact ion pairs than THF or DME. It has been determined that for a high-yield preparation of monosubstituted 1-R-1,2-C(2)B(10)H(11), in C(c)-R (R=C, S or P) coupling reactions, the reagent type defines which is the most appropriate ethereal solvent. In reactions in which a halide is generated, as with ClPPh(2) or BrCH(2) CH=CH(2), Et(2)O appears to produce the highest degree of monosubstitution. In other situations, such as with S(8), or when no halide is generated, THF or DME facilitate the largest degree of monosubstitution. It has been shown that upon the self reaction of Li[1,2-C(2)B(10)H(11)] to produce LiC(4)B(20)H(22) the nucleophilicity of the carboranyllithium can even be further enhanced, beyond the ethereal solvent, by synergism with halide salts. The mediation of Li(+) in producing isomerizations on allyl substituents has also been demonstrated, as Et(2)O does not tend to induce isomerization, whereas THF or DME produces the propenyl isomer. The results presented here most probably can be extended to other molecular types to interpret the Li(+) mediation in C-C or other C-X coupling reactions.
乙醚(Et(2)O)、四氢呋喃(THF)或二甲氧基乙烷(DME)等醚类溶剂对 1,2-C(2)B(10)H(12)平台上形成有机锂化合物的影响进行了研究。该平台非常吸引人,因为它包含两个相邻的 C(c)-H 单元,可用于锂化。人们预计,两个 C(c)-H 单元的接近程度会导致第二个 C(c)-H 单元在第一个锂化后更难被锂化。然而,事实并非如此,这使得 1,2-C(2)B(10)H(12)成为研究醚类溶剂对锂化过程影响的理想选择。碳硼烷二取代物种的形成归因于存在平衡,其中碳硼烷单锂化物种歧化为二锂碳硼烷和原始碳硼烷。锂(+)在碳硼烷片段中与 C(c)结合的方式以及溶剂如何稳定这种结合对于驱动反应生成单取代和二取代碳硼烷至关重要。实际上,单取代和二取代物种的比例是形成接触离子对的结果,在醚类溶剂中,分离离子对的程度较小。根据实验和理论数据,所有醚类溶剂都会生成接触离子对,其中可以假定 C(c)-Li(溶剂)键具有很大程度的共价键合。此外,与 THF 或 DME 相比,Et(2)O 倾向于生成具有更高程度接触离子对的碳硼烷基锂离子对。已经确定,对于 C(c)-R(R=C、S 或 P)偶联反应中高产率制备单取代 1-R-1,2-C(2)B(10)H(11),试剂类型决定了哪种醚类溶剂最合适。在生成卤化物的反应中,例如 ClPPh(2)或 BrCH(2)CH=CH(2),Et(2)O 似乎产生了最高程度的单取代。在其他情况下,例如 S(8),或当不生成卤化物时,THF 或 DME 有利于最大程度的单取代。已经表明,通过 Li[1,2-C(2)B(10)H(11)]的自反应生成LiC(4)B(20)H(22),碳硼烷基锂的亲核性甚至可以通过与卤化物盐的协同作用进一步增强,超出醚类溶剂的范围。还证明了 Li(+)在烯丙基取代基的异构化中的介导作用,因为 Et(2)O 不容易诱导异构化,而 THF 或 DME 则生成丙烯基异构体。这里呈现的结果很可能可以扩展到其他分子类型,以解释 Li(+)在 C-C 或其他 C-X 偶联反应中的介导作用。