Suppr超能文献

新型生物型全人工心脏的体外血液相容性。

In vitro haemocompatibility of a novel bioprosthetic total artificial heart.

机构信息

CARMAT SA, Vélizy-Villacoublay, France.

出版信息

Eur J Cardiothorac Surg. 2012 Jun;41(6):e166-72. doi: 10.1093/ejcts/ezs187. Epub 2012 Apr 4.

Abstract

OBJECTIVES

The CARMAT total artificial heart (TAH) is an implantable, electro-hydraulically driven, pulsatile flow device with four bioprosthetic valves. Its blood-pumping surfaces consist of processed bioprosthetic pericardial tissue and expanded polytetrafluorethylene (ePTFE), potentially allowing for the reduction of anti-coagulation. This pre-clinical study assessed the in vitro haemocompatibility of these surfaces.

METHODS

Coupons of pericardial tissue and ePTFE were placed in closed tubular circuits filled with 12.5 ml of fresh human blood exposed to the pulsatile flow at 120 ml/min for 4 h (37°C). Silicone- and heparin-coated polyvinyl chloride (PVC) tubes served as positive and negative controls, respectively. Fresh blood from six donors was used to fill four sets of 12 circuits. Blood samples were taken at baseline and from each circuit after 4 h. Coupons of materials were examined with scanning electron microscopy.

RESULTS

The platelet count was 202 ± 45 10(9) l(-1) at baseline. Four hours after circulation, the platelet counts were 161 ± 30 10(9) l(-1) (compared with baseline, P = 0.0207) for pericardial tissue, 162 ± 35 10(9) l(-1) (P = 0.0305) for ePTFE and 136 ± 42 10(9) l(-1) for positive controls (P = 0.0021). Baseline plasma fibrinogen was 2.9 ± 0.5 mg/dl compared with 3.0 ± 0.5 mg/dl for pericardial tissue and 3.1 ± 0.7 mg/dl for ePTFE, indicating no marked fibrinogen consumption. Thromboxane B2 levels for positive controls were 33.3 ± 8.7 ng/ml compared with 16.2 ± 11.5 ng/ml for pericardial tissue (P = 0.0015) and 15.2 ± 4.7 ng/ml for ePTFE (P < 0.0001). Platelet adhesion was 2.87 ± 1.01 10(9) cm(-2) for positive controls compared with 1.06 ± 0.73 10(9) cm(-2) for pericardial tissue (P < 0.0001) and 0.79 ± 0.75 10(9) cm(-2) for ePTFE (P < 0.0001). Thrombin-antithrombin III complex levels were 3.8 ± 0.5 μg/ml for positive controls compared with 1.9 ± 0.9 for pericardial tissue (P < 0.0001) and 2.1 ± 1.0 for ePTFE (P < 0.0001). With an electro-microscopic examination at ×600, only small depositions of platelets, erythrocytes and fibrin were noticed on the pericardial tissue samples and ePTFE samples. Silicone surfaces showed marked areas of thrombi, and PVC tubings a thin protein layer.

CONCLUSIONS

Haemocompatibility of the TAH blood-contacting surfaces was confirmed by in vitro studies showing a limited consumption of fibrin, limited thromboxane B2 release and platelet adhesion, and minor blood cell depositions on the surfaces. These results will be validated in clinical studies, with the aim of reducing anti-coagulation when using the CARMAT TAH.

摘要

目的

CARMAT 全人工心脏(TAH)是一种可植入的、电液驱动的、搏动血流装置,带有四个生物假体瓣膜。其血泵表面由加工过的生物假体心包组织和膨体聚四氟乙烯(ePTFE)组成,可能减少抗凝剂的使用。本临床前研究评估了这些表面的体外血液相容性。

方法

心包组织和 ePTFE 片材被放置在充满 12.5 毫升新鲜人血的封闭管状回路中,以 120 毫升/分钟的流量在 37°C 下循环 4 小时。硅胶和肝素涂覆的聚氯乙烯(PVC)管分别作为阳性和阴性对照。用来自六个供体的新鲜血液填充四个 12 回路。在基线和每个回路循环 4 小时后采集血样。用扫描电子显微镜检查材料片材。

结果

血小板计数在基线时为 202 ± 45 10(9) l(-1)。循环 4 小时后,血小板计数分别为心包组织 161 ± 30 10(9) l(-1)(与基线相比,P = 0.0207)、ePTFE 162 ± 35 10(9) l(-1)(P = 0.0305)和阳性对照 136 ± 42 10(9) l(-1)(P = 0.0021)。基线时血浆纤维蛋白原水平为 2.9 ± 0.5 mg/dl,与心包组织的 3.0 ± 0.5 mg/dl 和 ePTFE 的 3.1 ± 0.7 mg/dl 相比,表明纤维蛋白原消耗不明显。阳性对照物的血栓烷 B2 水平为 33.3 ± 8.7 ng/ml,与心包组织的 16.2 ± 11.5 ng/ml(P = 0.0015)和 ePTFE 的 15.2 ± 4.7 ng/ml(P < 0.0001)相比。阳性对照物的血小板黏附率为 2.87 ± 1.01 10(9) cm(-2),与心包组织的 1.06 ± 0.73 10(9) cm(-2)(P < 0.0001)和 ePTFE 的 0.79 ± 0.75 10(9) cm(-2)(P < 0.0001)相比。阳性对照物的凝血酶-抗凝血酶 III 复合物水平为 3.8 ± 0.5 μg/ml,与心包组织的 1.9 ± 0.9 μg/ml(P < 0.0001)和 ePTFE 的 2.1 ± 1.0 μg/ml(P < 0.0001)相比。在 ×600 的电镜检查下,仅在心包组织样品和 ePTFE 样品上观察到少量血小板、红细胞和纤维蛋白的沉积。硅胶表面显示出明显的血栓区域,而 PVC 管材则有一层薄的蛋白质层。

结论

通过显示纤维蛋白消耗有限、血栓烷 B2 释放和血小板黏附有限以及细胞在表面上的少量沉积的体外研究,证实了 TAH 血液接触表面的血液相容性。这些结果将在临床研究中得到验证,目的是在使用 CARMAT TAH 时减少抗凝剂的使用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验