Science and Technology Branch, Environment Canada, Toronto, Ontario, Canada M3H 5T4.
Environ Sci Technol. 2012 Jul 3;46(13):7199-206. doi: 10.1021/es300898s. Epub 2012 Jun 15.
Gas-phase perfluoroalkyl carboxylic acids (PFCAs) sorb strongly on filter material (i.e., GFF, QFF) used in conventional high volume air samplers, which results in an overestimation of the particle-phase concentration. In this study, we investigated an improved technique for measuring the gas-particle partitioning of per- and polyfluoroalkyl substances (PFASs) using an annular diffusion denuder sampler. Samples were analyzed for 7 PFAS classes [i.e., PFCAs, perfluoroalkane sulfonic acids (PFSAs), fluorotelomer alcohols (FTOHs), fluorotelomer methacrylates (FTMACs), fluorotelomer acrylates (FTACs), perfluorooctane sulfonamides (FOSAs), and perfluorooctane sulfonamidoethanols (FOSEs)]. The measured particulate associated fraction (Φ') using the diffusion denuder sampler generally followed the trend FTACs (0%) < FTOHs (8%) < FOSAs (21%) < PFSAs (29%) < FOSEs (66%), whereas the Φ' of the C(8)-C(18) PFCAs increased with carbon chain length, and ranged from 6% to 100%. The ionizability of some PFASs, when associated with particles, is an important consideration when calculating the gas-particle partitioning coefficient as both ionic and neutral forms can be present in the particles. Here we differentiate between a gas-particle partitioning coefficient for neutral species, K(p), and one that accounts for both ionic and neutral species of a compound, K(p)'. The measured K(p)' for PFSAs and PFCAs was 4-5 log units higher compared to the interpolated K(p) for the neutral form only. The measured K(p)' can be corrected (to apply to the neutral form only) with knowledge of the pK(a) of the chemical and the pH of the condensed medium ("wet" particle or aqueous aerosol). The denuder-based sampling of PFASs has yielded a robust data set that demonstrates the importance of atmospheric pH and chemical pK(a) values in determining gas-particle partitioning of PFASs.
气相全氟羧酸(PFCAs)强烈吸附在常规大体积空气采样器中使用的过滤材料(即 GFF、QFF)上,这导致颗粒相浓度的高估。在这项研究中,我们使用环形扩散冲击采样器研究了一种改进的测量 Per-和多氟烷基物质(PFASs)的气-粒分配的技术。对 7 种 PFAS 类别的样品进行了分析[即 PFCAs、全氟烷磺酸(PFSA)、氟代醇(FTOH)、氟代甲基丙烯酸酯(FTMAC)、氟代丙烯酸酯(FTAC)、全氟辛烷磺酰胺(FOSA)和全氟辛烷磺酰胺乙氧基乙醇(FOSE)]。使用扩散冲击采样器测量的颗粒相关分数(Φ')通常遵循 FTAC(0%)<FTOH(8%)<FOSA(21%)<PFSA(29%)<FOSE(66%)的趋势,而 C(8)-C(18)PFCAs 的Φ'随着碳链长度的增加而增加,范围为 6%至 100%。当某些 PFASs 与颗粒结合时,其离子化是计算气-粒分配系数时的一个重要考虑因素,因为离子形式和中性形式都可以存在于颗粒中。在这里,我们区分了仅为中性物质的气-粒分配系数 K(p)和同时考虑化合物的离子和中性形式的系数 K(p)‘。与仅为中性形式的 PFSA 和 PFCAs 插值 K(p)相比,测量的 K(p)‘高 4-5 个对数单位。可以通过化学物质的 pK(a)和凝聚介质的 pH 值(“湿”颗粒或水气溶胶)的知识来校正测量的 K(p)‘(仅适用于中性形式)。基于冲击器的 PFAS 采样提供了一个可靠的数据集,该数据集表明大气 pH 值和化学 pK(a)值在确定 PFASs 的气-粒分配中的重要性。