Institute of Applied Chemistry, Department of Chemical Engineering, Tsinghua University, Beijing 100084, China.
Bioresour Technol. 2012 Aug;117:25-32. doi: 10.1016/j.biortech.2012.04.062. Epub 2012 Apr 26.
A lignocellulose pretreatment process was developed with formic acid delignification (FAD) followed by alkaline deformylation (AD), which was termed as Formiline process. In FAD, more than 80% of lignin and hemicellulose were removed, but cellulose formylation also happened. Formic acid concentration (FAC) was the most important factor affecting delignification and cellulose formylation. Increasing FAC could enhance degree of delignification but also increased cellulose formylation. The presence of formyl group could inhibit the enzymatic hydrolysis of cellulose; however, removing formyl group with a small loading of alkali well recovered cellulose digestibility. The spent liquor could be directly recycled for delignification thus significantly decreasing energy consumption in solvent recovery. The Formiline-pretreated substrates showed an excellent enzymatic digestibility and could be very well converted to ethanol by simultaneous saccharafication and fermentation (SSF). The final ethanol concentrations were 55.4 and 80.1g/L respectively at initial solid consistencies of 15% and 20%.
开发了一种木质纤维素预处理工艺,采用甲酸脱木质素(FAD),然后进行碱性去甲酰基(AD),称为 Formiline 工艺。在 FAD 中,超过 80%的木质素和半纤维素被去除,但纤维素甲酰化也发生了。甲酸浓度(FAC)是影响脱木质素和纤维素甲酰化的最重要因素。增加 FAC 可以提高脱木质素程度,但也增加了纤维素甲酰化。甲酰基的存在会抑制纤维素的酶解;然而,用少量的碱去除甲酰基可以很好地恢复纤维素的可消化性。废溶剂可以直接回收用于脱木质素,从而显著降低溶剂回收过程中的能源消耗。Formiline 预处理底物具有极好的酶解可消化性,并且可以通过同步糖化和发酵(SSF)很好地转化为乙醇。在初始固体浓度为 15%和 20%时,最终乙醇浓度分别为 55.4 和 80.1g/L。