Suppr超能文献

使用更新的基于真菌纤维素结合模块的荧光探针蛋白可视化纤维素酶吸附并定量测定纤维素可及性。

Visualizing cellulase adsorption and quantitatively determining cellulose accessibility with an updated fungal cellulose-binding module-based fluorescent probe protein.

作者信息

Li Tian, Liu Nan, Ou Xianjin, Zhao Xuebing, Qi Feng, Huang Jianzhong, Liu Dehua

机构信息

Key Laboratory for Industrial Biocatalysis, Ministry of Education of China, Institute of Applied Chemistry, Department of Chemical Engineering, Tsinghua University, Beijing, 100084 China.

2Engineering Research Center of Industrial Microbiology of Ministry of Education, College of Life Sciences, Fujian Normal University, Fuzhou, 350117 Fujian China.

出版信息

Biotechnol Biofuels. 2018 Apr 9;11:105. doi: 10.1186/s13068-018-1105-0. eCollection 2018.

Abstract

BACKGROUND

Cellulose accessibility to cellulases (CAC) is a direct factor determining the enzymatic digestibility of lignocellulosic cellulose. Improving CAC by pretreatment is a prerequisite step for the efficient release of fermentable sugars from biomass cell wall. However, conventional methods to study the porosimetry of solid materials showed some limitations to be used for investigating CAC. In this work, an updated novel fusion protein comprising a fungal cellulose-binding module (CBM) from Cel7A cellobiohydrolase I (CBH I) of QM6 and a di-green fluorescent protein (GFP) was constructed for quantitative determination of CAC.

RESULTS

The obtained probe protein had similar molecular size (e.g., weight) with that of Cel7A and could give detectable signal for quantitative analysis. Several construction strategies were compared with regard to the site of His-tag and order of CBM and GFP modules in the protein sequence, in order to achieve good expression quantity and usability of the probe protein. His6-CBM-GFP has been identified as the best probe protein for investigating the effects of structural features of cellulosic substrates on cellulose accessibility. Substrate samples with different contents of xylan, lignin, and degree of substitution of cellulose -OH by formyl group were obtained, respectively, by mild HSO pre-hydrolysis, NaClO selective delignification, and treatment of filter paper cellulose with concentrated formic acid. The determined CAC was in a wide range of 0.6-20.4 m/g depending on the contents of hemicelluloses, lignin, and formyl group as well as cellulose degree of crystallization.

CONCLUSIONS

The obtained fusion probe protein could be used as a versatile tool to quantitatively investigate the impacts of biomass structural features on CAC and hydrolyzability of cellulose substrates, as well as nonproductive adsorption of cellulase enzymes on lignin.

摘要

背景

纤维素对纤维素酶的可及性(CAC)是决定木质纤维素酶解消化率的直接因素。通过预处理提高CAC是从生物质细胞壁高效释放可发酵糖的前提步骤。然而,传统的研究固体材料孔隙率的方法在用于研究CAC时存在一些局限性。在本研究中,构建了一种更新的新型融合蛋白,其包含来自QM6的纤维二糖水解酶I(CBH I)的Cel7A的真菌纤维素结合模块(CBM)和双绿色荧光蛋白(GFP),用于定量测定CAC。

结果

获得的探针蛋白与Cel7A具有相似的分子大小(如重量),并能给出可检测信号用于定量分析。比较了几种关于His标签位点以及蛋白质序列中CBM和GFP模块顺序的构建策略,以实现探针蛋白的良好表达量和可用性。His6-CBM-GFP已被确定为研究纤维素底物结构特征对纤维素可及性影响的最佳探针蛋白。分别通过温和的HSO预水解、NaClO选择性脱木质素以及用浓甲酸处理滤纸纤维素,获得了具有不同木聚糖、木质素含量以及纤维素-OH甲酰化取代度的底物样品。根据半纤维素、木质素和甲酰基的含量以及纤维素结晶度,测定的CAC在0.6 - 20.4 m/g的宽范围内。

结论

所获得的融合探针蛋白可作为一种通用工具,用于定量研究生物质结构特征对CAC和纤维素底物水解性的影响,以及纤维素酶在木质素上的非生产性吸附。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/61ba/5890345/32d8dc3ca81c/13068_2018_1105_Fig1_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验