State Key Laboratory of Water Simulation, School of Environment, Beijing Normal University, Beijing 100875, PR China.
Bioresour Technol. 2012 Aug;118:120-7. doi: 10.1016/j.biortech.2012.05.008. Epub 2012 May 11.
Molecular variations among different biochar categories translate into differences in their ability to function as sorbents to three phthalic acid esters (PAEs) representing a gradient in hydrophobicity. The sorption capacity (K(OC)) for all three PAEs was the greatest for amorphous biochars (heat treatment temperature HTT=400 °C), followed by biochars produced at 300 °C, and was best explained by the hydrophobicity of the sorbate. Greater alkyl C content and higher polarity of grass chars versus wood chars prepared at similar temperatures explained both (a) the difference in sorbent strength between feedstocks and (b) the maximum in sorbent strength at relatively low HTTs (300-400 °C). Hydrophobic partitioning into 'soft' alkyl carbon and specific H-bonding involving char-bound O and N groups jointly account for high affinities of PAEs for low-HTT biochars. The results highlight the influence of feedstocks and HTTs on PAEs sorption strength and mechanism.
不同生物炭种类之间的分子变化转化为它们作为吸附剂吸附三种邻苯二甲酸酯(PAEs)的能力的差异,这三种 PAEs 代表了疏水性的梯度。所有三种 PAEs 的吸附容量(K(OC))在无定形生物炭中最大(热处理温度 HTT=400°C),其次是在 300°C 下生产的生物炭,这可以用吸附质的疏水性来很好地解释。与在相似温度下制备的草炭相比,更大的烷基 C 含量和更高的极性解释了(a)原料之间吸附剂强度的差异和(b)在相对较低的 HTT(300-400°C)下吸附剂强度的最大值。疏水性分配到“软”烷基碳和涉及炭结合的 O 和 N 基团的特定氢键共同解释了 PAEs 对低 HTT 生物炭的高亲和力。结果强调了原料和 HTT 对 PAEs 吸附强度和机制的影响。