Graduate School of Agriculture, Kyoto University, Kitashirakawa-Oiwake-cho, Sakyo-ku, Kyoto, Japan.
Langmuir. 2012 Aug 28;28(34):12609-18. doi: 10.1021/la3026528. Epub 2012 Aug 15.
This article provides detailed insight into the thermoresponsive gelation mechanism of industrially produced methylcellulose (MC), highlighting the importance of diblock structure with a hydrophobic sequence of 2,3,6-tri-O-methyl-glucopyranosyl units for this physicochemical property. We show herein, for the first time, that well-defined diblock MC self-assembles thermoresponsively into ribbonlike nanostructures in water. A cryogenic transmission electron microscopy (cryo-TEM) technique was used to detect the ribbonlike nanostructures formed by the diblock copolymers consisting of hydrophilic glucosyl or cellobiosyl and hydrophobic 2,3,6-tri-O-methyl-cellulosyl blocks, methyl β-D-glucopyranosyl-(1→4)-2,3,6-tri-O-methyl-celluloside 1 (G-236MC, DP(n) = 10.7, DS = 2.65), and methyl β-D-glucopyranosyl-(1→4)-β-D-glucopyranosyl-(1→4)-2,3,6-tri-O-methyl-celluloside 2 (GG-236MC, DP(n) = 28.2, DS = 2.75). Rheological measurements revealed that the gel strength of a dispersion of GG-236MC (2, 2.0 wt %) in water at 70 °C was 3.0 times stronger than that of commercial MC SM-8000, although the molecular weight of GG-236MC (2) having M(w) = 8 × 10(3) g/mol was 50 times smaller than that of SM-8000 having M(w) = 4 × 10(5) g/mol. Cryo-TEM observation suggested that the hydrogel formation of the diblock copolymers could be attributed to the entanglement of ribbonlike nanostructures self-assembled by the diblock copolymers in water. The cryo-TEM micrograph of GG-236MC (2) at 5 °C showed rectangularly shaped nanostructures having a thickness from 11 to 24 nm, although G-236MC (1) at 20 °C showed no distinct self-assembled nanostructures. The ribbonlike nanostructures of GG-236MC (2) having a length ranging from 91 to 864 nm and a thickness from 8.5 to 27.1 nm were detected above 20 °C. Small-angle X-ray scattering measurements suggested that the ribbonlike nanostructures of GG-236MC (2) consisted of a bilayer structure with a width of ca. 40 nm. It was likely that GG-236MC (2) molecules were oriented perpendicularly to the long axis of the ribbonlike nanostructure. In addition, wide-angle X-ray scattering measurements revealed that GG-236MC (2) in its hydrogel formed the same crystalline regions as 2,3,6-tri-O-methylcellulose. The influence of the DP of diblock MC with a DS of around 2.7 on the gelation behavior will be discussed.
本文深入探讨了工业生产的甲基纤维素(MC)的温敏凝胶化机制,强调了具有疏水 2,3,6-三-O-甲基葡萄糖基序列的嵌段结构对于这种物理化学性质的重要性。我们首次表明,具有明确结构的嵌段 MC 能够在水中自组装成温敏的带状纳米结构。低温透射电子显微镜(cryo-TEM)技术用于检测由亲水性葡萄糖基或纤维二糖基和疏水性 2,3,6-三-O-甲基纤维素基嵌段组成的嵌段共聚物形成的带状纳米结构,甲基 β-D-吡喃葡萄糖基-(1→4)-2,3,6-三-O-甲基纤维素 1(G-236MC,DP(n) = 10.7,DS = 2.65)和甲基 β-D-吡喃葡萄糖基-(1→4)-β-D-吡喃葡萄糖基-(1→4)-2,3,6-三-O-甲基纤维素 2(GG-236MC,DP(n) = 28.2,DS = 2.75)。流变学测量表明,在 70°C 下 GG-236MC(2,2.0wt%)在水中的分散体的凝胶强度比商业 MC SM-8000 强 3.0 倍,尽管 GG-236MC(2)的分子量(M(w) = 8×10(3)g/mol)比分子量为 4×10(5)g/mol 的 SM-8000 小 50 倍。低温透射电子显微镜观察表明,嵌段共聚物的水凝胶形成可归因于嵌段共聚物在水中自组装的带状纳米结构的缠结。在 5°C 下 GG-236MC(2)的低温透射电子显微镜照片显示出厚度为 11 至 24nm 的矩形纳米结构,而在 20°C 下 G-236MC(1)则没有明显的自组装纳米结构。在 20°C 以上,检测到 GG-236MC(2)的长度为 91 至 864nm 且厚度为 8.5 至 27.1nm 的带状纳米结构。小角 X 射线散射测量表明,GG-236MC(2)的带状纳米结构由宽度约为 40nm 的双层结构组成。GG-236MC(2)分子可能垂直于带状纳米结构的长轴取向。此外,广角 X 射线散射测量表明,GG-236MC(2)在其水凝胶中形成与 2,3,6-三-O-甲基纤维素相同的结晶区。将讨论具有约 2.7 DS 的嵌段 MC 的 DP 对凝胶化行为的影响。