Center for Microbial Genetic Engineering, The Biodesign Institute, Arizona State University, Tempe, AZ 85287-5401, USA.
J Biotechnol. 2012 Nov 15;161(4):445-9. doi: 10.1016/j.jbiotec.2012.08.013. Epub 2012 Aug 31.
We have developed a genetic system we call "thermorecovery" that allows us to lyse cyanobacterial cultures and hydrolyze membrane lipids to release free fatty acids (FFAs), a biofuel precursor. The system uses thermostable lipases encoded by genes from thermophilic organisms that have been transferred into the cyanobacterial genome and can be synthesized by turning off CO(2) availability and subsequently activated by increasing the concentrated culture temperature. When synthesized in FFA-producing strains, the lipase Fnl from Fervidobacterium nodosum Rt17-B1 released the most FFA. Of the seven candidate lipases investigated, Fnl-synthesizing strains yielded 42.7±1.5 mg/l FFA at 47°C. We also determined that the optimal production conditions for SD338, the Synechocystis strain synthesizing Fnl, was to keep the cell concentrates at 46°C for two days after a one-day CO(2) limitation pretreatment of the culture. A 4-l continuous semi-batch production experiment with SD338 showed that daily harvested cultures (1l) released an average of 43.9±6.6 mg fatty acid and this productivity lasted for at least 20 days without significant decline. This improved thermorecovery process can be used in conjunction with other means to genetically engineer cyanobacteria to produce biofuels or biofuel precursors as the final step in recovery of membrane lipids.
我们开发了一种名为“热恢复”的遗传系统,该系统可裂解蓝藻培养物并水解膜脂以释放游离脂肪酸 (FFA),FFA 是生物燃料的前体。该系统使用来自嗜热生物的基因编码的热稳定脂肪酶,这些基因已被转移到蓝藻基因组中,并且可以通过关闭 CO2 的可用性并随后通过增加浓缩培养物的温度来合成。当在产生 FFA 的菌株中合成时,来自 Fervidobacterium nodosum Rt17-B1 的脂肪酶 Fnl 释放出最多的 FFA。在所研究的七种候选脂肪酶中,合成 Fnl 的菌株在 47°C 时产生 42.7±1.5 mg/l FFA。我们还确定了合成 Fnl 的 Synechocystis 菌株 SD338 的最佳生产条件是在 CO2 限制预处理培养物一天后,将细胞浓缩物保持在 46°C 两天。SD338 的 4-l 连续半分批生产实验表明,每天收获的培养物(1l)平均释放 43.9±6.6 mg 脂肪酸,这种生产力至少持续了 20 天,没有明显下降。这种改进的热恢复过程可以与其他方法结合使用,以通过遗传工程改造蓝藻生产生物燃料或生物燃料前体,作为回收膜脂的最后一步。