Department of Civil and Environmental Engineering, The Hong Kong University of Science and Technology, Hong Kong, China.
Water Res. 2013 Jan 1;47(1):163-72. doi: 10.1016/j.watres.2012.09.040. Epub 2012 Oct 5.
Total organic iodine (TOI) is a collective parameter and a toxicity indicator for all the iodinated disinfection byproducts in a water sample. The currently used TOI measurement method involves adsorption of organic iodine onto activated carbon, pyrolysis of adsorbed organic iodine to hydrogen iodide, absorption of hydrogen iodide into a solution, and off-line separation/detection of iodide in the absorption solution using ion chromatography coupled with conductivity detection. In this study, a new approach with ultra performance liquid chromatography/electrospray ionization-mass spectrometry (UPLC/ESI-MS) detection by setting selected ion recording of m/z 127 in the negative ion mode (instead of ion chromatography-conductivity detection) was developed for off-line iodide separation/detection in the TOI measurement. An obstacle with the new approach was found to be a series of adducts (with the same m/z value as iodide) formed in the mobile phase and at the ESI-MS sample cone, which were effectively eliminated by acidifying the absorption solution with formic acid and optimizing the instrumental parameters. By comparing the calibration curves of seven aliphatic and aromatic iodine-containing standard compounds, iodoacetic acid was determined to be an appropriate calibration standard for the TOI measurement. This new approach was found to be more sensitive, accurate and rapid. The quantitation limit of TOI was 5 μg/L as I for a 40 mL water sample or 2.5 μg/L as I for an 80 mL water sample. TOI recoveries were 94-103% for seven iodine-containing compounds and 91-108% for two wastewater and six tap water samples. The run duration for analyzing iodide in the absorption solution was only 4 min. With the new approach, TOI concentrations in various types of water samples were successfully analyzed and compared. This approach provides a sensitive tool for investigating the formation and control of iodinated DBPs in disinfected drinking water and wastewater.
总有机碘(TOI)是水样中所有碘代消毒副产物的综合参数和毒性指标。目前使用的 TOI 测量方法包括将有机碘吸附到活性炭上,将吸附的有机碘热解为碘化氢,将碘化氢吸收到溶液中,然后使用离子色谱法结合电导率检测在吸收溶液中在线分离/检测碘化物。在这项研究中,开发了一种新方法,通过在负离子模式下设置 m/z 127 的选择离子记录(而不是离子色谱-电导率检测),使用超高效液相色谱/电喷雾电离-质谱(UPLC/ESI-MS)检测进行离线 TOI 测量中的碘化物分离/检测。新方法的一个障碍是在流动相中以及在 ESI-MS 样品锥中形成了一系列加合物(与碘化物具有相同的 m/z 值),通过用甲酸酸化吸收溶液并优化仪器参数,可以有效地消除这些加合物。通过比较七种脂肪族和芳香族含碘标准化合物的校准曲线,发现碘乙酸是 TOI 测量的合适校准标准。这种新方法具有更高的灵敏度、准确性和快速性。TOI 的定量限为 40 mL 水样中 5 μg/L 的碘或 80 mL 水样中 2.5 μg/L 的碘。七种含碘化合物的 TOI 回收率为 94-103%,两种废水和六种自来水样品的回收率为 91-108%。分析吸收溶液中碘化物的运行时间仅为 4 分钟。使用新方法成功分析和比较了各种类型水样中的 TOI 浓度。该方法为研究消毒饮用水和废水中碘代 DBPs 的形成和控制提供了一种灵敏的工具。