Suppr超能文献

基于 Li(4)Ti(5)O(12)的电池中的气体生成及其解决方法。

Gassing in Li(4)Ti(5)O(12)-based batteries and its remedy.

机构信息

Engineering Laboratory for Functionalized Carbon Materials and Key Laboratory of Thermal Management Engineering and Materials, Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055, China.

出版信息

Sci Rep. 2012;2:913. doi: 10.1038/srep00913. Epub 2012 Dec 3.

Abstract

Destructive gas generation with associated swelling has been a major challenge to the large-scale application of lithium ion batteries (LIBs) made from Li(4)Ti(5)O(12) (LTO) anodes. Here we report root causes of the gassing behavior, and suggest remedy to suppress it. The generated gases mainly contain H(2), CO(2) and CO, which originate from interfacial reactions between LTO and surrounding alkyl carbonate solvents. The reactions occur at the very thin outermost surface of LTO (111) plane, which result in transformation from (111) to (222) plane and formation of (101) plane of anatase TiO(2). A nanoscale carbon coating along with a stable solid electrolyte interface (SEI) film around LTO is seen most effective as a barrier layer in suppressing the interfacial reaction and resulting gassing from the LTO surface. Such an ability to tune the interface nanostructure of electrodes has practical implications in the design of next-generation high power LIBs.

摘要

破坏性气体的产生伴随着膨胀,这一直是大规模应用基于 Li(4)Ti(5)O(12) (LTO) 阳极的锂离子电池 (LIBs) 的主要挑战。在这里,我们报告了放气行为的根本原因,并提出了抑制它的方法。产生的气体主要包含 H(2)、CO(2) 和 CO,它们来源于 LTO 与周围的烷基碳酸盐溶剂之间的界面反应。这些反应发生在 LTO (111) 平面的最薄的最外层表面,导致从 (111) 到 (222) 平面的转变,并形成锐钛矿 TiO(2)的 (101) 平面。在 LTO 周围形成纳米级的碳涂层以及稳定的固体电解质界面 (SEI) 膜,作为阻挡层,最有效地抑制了界面反应和来自 LTO 表面的放气。这种调节电极界面纳米结构的能力在设计下一代高功率 LIBs 方面具有实际意义。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/03cc/3512089/bd999570716f/srep00913-f1.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验