Bai Sen, Li Guangjun, Wang Maojie, Jiang Qinfeng, Zhang Yingjie, Wei Yuquan
State Key Laboratory of Biotherapy and Cancer Center, West China Hospital, Sichuan University, Chengdu, Sichuan, PR China.
Med Dosim. 2013 Summer;38(2):143-7. doi: 10.1016/j.meddos.2012.10.002. Epub 2013 Feb 8.
The purpose of this study was to investigate the effect of multileaf collimator (MLC) leaf position, collimator rotation angle, and accelerator gantry rotation angle errors on intensity-modulated radiotherapy plans for nasopharyngeal carcinoma. To compare dosimetric differences between the simulating plans and the clinical plans with evaluation parameters, 6 patients with nasopharyngeal carcinoma were selected for simulation of systematic and random MLC leaf position errors, collimator rotation angle errors, and accelerator gantry rotation angle errors. There was a high sensitivity to dose distribution for systematic MLC leaf position errors in response to field size. When the systematic MLC position errors were 0.5, 1, and 2mm, respectively, the maximum values of the mean dose deviation, observed in parotid glands, were 4.63%, 8.69%, and 18.32%, respectively. The dosimetric effect was comparatively small for systematic MLC shift errors. For random MLC errors up to 2mm and collimator and gantry rotation angle errors up to 0.5°, the dosimetric effect was negligible. We suggest that quality control be regularly conducted for MLC leaves, so as to ensure that systematic MLC leaf position errors are within 0.5mm. Because the dosimetric effect of 0.5° collimator and gantry rotation angle errors is negligible, it can be concluded that setting a proper threshold for allowed errors of collimator and gantry rotation angle may increase treatment efficacy and reduce treatment time.
本研究的目的是探讨多叶准直器(MLC)叶片位置、准直器旋转角度和加速器机架旋转角度误差对鼻咽癌调强放射治疗计划的影响。为了通过评估参数比较模拟计划和临床计划之间的剂量差异,选取6例鼻咽癌患者模拟系统和随机的MLC叶片位置误差、准直器旋转角度误差以及加速器机架旋转角度误差。对于系统MLC叶片位置误差,射野大小对剂量分布具有较高的敏感性。当系统MLC位置误差分别为0.5、1和2mm时,腮腺中观察到的平均剂量偏差最大值分别为4.63%、8.69%和18.32%。系统MLC移位误差的剂量学影响相对较小。对于高达2mm的随机MLC误差以及高达0.5°的准直器和机架旋转角度误差,剂量学影响可忽略不计。我们建议定期对MLC叶片进行质量控制,以确保系统MLC叶片位置误差在0.5mm以内。由于0.5°准直器和机架旋转角度误差的剂量学影响可忽略不计,因此可以得出结论,为允许的准直器和机架旋转角度误差设定适当的阈值可能会提高治疗效果并缩短治疗时间。