Small Systems Laboratory, Department of Mechanical Engineering, University of Louisville, Louisville, Kentucky 40292, USA.
Sci Rep. 2013;3:1900. doi: 10.1038/srep01900.
The addition of nanomaterials to polymers can result not only in significant material property improvements, but also assist in creating entirely new composite functionalities. By dispersing graphene nanoplatelets (GNPs) within a polydimethylsiloxane matrix, we show that efficient light absorption by GNPs and subsequent energy transduction to the polymeric chains can be used to controllably produce significant amounts of motion through entropic elasticity of the pre-strained composite. Using dual actuators, a two-axis sub-micron resolution stage was developed, and allowed for two-axis photo-thermal positioning (~100 μm per axis) with 120 nm resolution (feedback sensor limitation), and ~5 μm/s actuation speeds. A PID control loop automatically stabilizes the stage against thermal drift, as well as random thermal-induced position fluctuations (up to the bandwidth of the feedback and position sensor). Maximum actuator efficiency values of ~0.03% were measured, approximately 1000 times greater than recently reported for light-driven polymer systems.
将纳米材料添加到聚合物中不仅可以显著改善材料性能,还可以帮助创造全新的复合材料功能。通过在聚二甲基硅氧烷基质中分散石墨烯纳米片(GNPs),我们表明 GNPs 的高效光吸收以及随后的能量传递到聚合物链可以用于通过预应变复合材料的熵弹性来可控地产生大量运动。使用双驱动器,开发了一个具有亚微米分辨率的两轴工作台,允许进行具有 120nm 分辨率(反馈传感器限制)和5μm/s 致动速度的两轴光热定位(100μm/轴)。PID 控制回路自动稳定工作台以抵抗热漂移以及随机热诱导的位置波动(达到反馈和位置传感器的带宽)。测量到的最大执行器效率值约为 0.03%,大约是最近报道的光驱动聚合物系统的 1000 倍。