Department of Sport and Physical Education, University of Valencia, Valencia, Spain.
Sports Biomech. 2013 Mar;12(1):38-47. doi: 10.1080/14763141.2013.765906.
The objective of this study was to explore the effects of tennis shoe characteristics on performance during sideward cutting movements followed by direction changes. Five tennis players (age = 21.5 +/- 0.8 years, mass = 75.2 +/- 2.8 kg, and height = 1.78 +/- 0.05 m) participated in the study and 10 tennis shoes were tested. Several footwear mechanical parameters were analyzed: Shore A hardness, longitudinal and transverse flexibility, midsole height at heel, presence of heel counters, and weight. A force plate was used to measure the kinetic variables, and two video cameras were used to perform a three-dimensional photogrammetric analysis. Results revealed that subject-footwear interaction was statistically not significant (p > 0.05) for the kinetic and kinematic variables. Only contact time (p = 0.008) and supination movement (p = 0.009) were footwear dependent. Positive correlations between contact time and first supination peak (r = 0.783, p = 0.007) and second supination peak (r = 0.730, p = 0.016) were observed. Impulse was not changed, which means shoes limiting supination allowed tennis players to perform faster sideward cutting movements.
本研究旨在探讨网球鞋特性对侧向切割运动后方向变化的表现的影响。5 名网球运动员(年龄=21.5±0.8 岁,体重=75.2±2.8 千克,身高=1.78±0.05 米)参加了研究,共测试了 10 双网球鞋。分析了几种鞋类机械参数:肖氏 A 硬度、纵向和横向柔韧性、后跟中底高度、后跟衬垫的存在和重量。使用测力板测量动力学变量,使用两台摄像机进行三维摄影测量分析。结果表明,对于动力学和运动学变量,受试者-鞋类相互作用在统计学上没有显著性差异(p>0.05)。只有接触时间(p=0.008)和旋前运动(p=0.009)与鞋类有关。接触时间与第一次旋前峰值(r=0.783,p=0.007)和第二次旋前峰值(r=0.730,p=0.016)之间存在正相关。冲量没有改变,这意味着限制旋前的鞋子可以使网球运动员更快地完成侧向切割运动。