Department of Materials Engineering and Ceramics & CICECO, University of Aveiro, 3810-193, Aveiro, Portugal.
J Mol Model. 2013 Sep;19(9):3591-602. doi: 10.1007/s00894-013-1891-z. Epub 2013 Jun 2.
In this work, computational molecular modeling and exploration was applied to study the nature of the negative piezoelectric effect in the ferroelectric polymer polyvinylidene fluoride (PVDF), and the results confirmed by actual nanoscale measurements. First principle calculations were employed, using various quantum-chemical methods (QM), including semi-empirical (PM3) and various density functional theory (DFT) approaches, and in addition combined with molecular mechanics (MM) methods in complex joint approaches (QM/MM). Both PVDF molecular chains and a unit cell of crystalline β-phase PVDF were modeled. This computational molecular exploration clearly shows that the nature of the so-called negative piezo-electric effect in the ferroelectric PVDF polymer has a self-consistent quantum nature, and is related to the redistribution of the electron molecular orbitals (wave functions), leading to the shifting of atomic nuclei and reorganization of all total charges to the new, energetically optimal positions, under an applied electrical field. Molecular modeling and first principles calculations show that the piezoelectric coefficient d 33 has a negative sign, and its average values lies in the range of d 33 ~ -16.6 to -19.2 pC/N (or pm/V) (for dielectric permittivity ε = 5) and in the range of d 33 ~ -33.5 to -38.5 pC/N (or pm/V) (for ε = 10), corresponding to known data, and allowing us to explain the reasons for the negative sign of the piezo-response. We found that when a field is applied perpendicular to the PVDF chain length, as polarization increases the chain also stretches, increasing its length and reducing its height. For computed value of ε ~ 5 we obtained a value of d31 ~ +15.5 pC/N with a positive sign. This computational study is corroborated by measured nanoscale data obtained by atomic force and piezo-response force microscopy (AFM/PFM). This study could be useful as a basis for further insights into other organic and molecular ferroelectrics.
在这项工作中,我们应用计算分子建模和探索来研究铁电聚合物聚偏二氟乙烯(PVDF)中负压电效应的本质,并通过实际的纳米尺度测量来验证结果。我们使用了各种量子化学方法(QM),包括半经验(PM3)和各种密度泛函理论(DFT)方法,并结合分子力学(MM)方法,在复杂的联合方法(QM/MM)中进行了第一性原理计算。我们对 PVDF 分子链和晶体β相 PVDF 的一个单胞进行了建模。这种计算分子探索清楚地表明,在铁电 PVDF 聚合物中所谓的负压电效应的本质具有一致的量子性质,并且与电子分子轨道(波函数)的重新分布有关,导致原子核的移动和所有总电荷重新分布到新的、能量最优的位置,在施加电场的情况下。分子建模和第一性原理计算表明,压电系数 d33 具有负号,其平均值位于 d33-16.6 至-19.2 pC/N(或 pm/V)(对于介电常数 ε=5)和 d33-33.5 至-38.5 pC/N(或 pm/V)(对于 ε=10)的范围内,与已知数据相符,并允许我们解释压电响应负号的原因。我们发现,当电场垂直于 PVDF 链长施加时,随着极化的增加,链也会伸展,增加其长度并降低其高度。对于计算得到的 ε5,我们得到了一个正号的 d31+15.5 pC/N 值。这项计算研究得到了原子力和压电力显微镜(AFM/PFM)获得的纳米尺度测量数据的证实。这项研究可以作为进一步深入研究其他有机和分子铁电体的基础。