Division of Orthodontics, College of Dentistry, The Ohio State University, Columbus, OH 43210, USA.
Implant Dent. 2013 Aug;22(4):399-405. doi: 10.1097/ID.0b013e31829b17b5.
To investigate if a dental implant system with a midsection covered by 3-dimensionally porous tantalum material would exhibit stability comparable with a traditional threaded titanium alloy implant system and whether bone would grow into the porous section.
Three experimental and 3 control implants were placed in the individual mandibles of 8 dogs. Resonance frequency analysis assessed implant stability at 0, 2, 4, 8, and 12 weeks of healing. Histomorphometric and backscattered scanning electron microscopic analyses examined the presence of bone ingrowth into the experimental implant's porous section and bone-to-implant contact along the titanium surfaces of both implants.
Implant stability did not significantly differ during 0 to 12 weeks of healing. Progressive tissue mineralization developed inside porous sections from weeks 2 to 12. Porous implants exhibited a combination of progressive osseointegration along their titanium surfaces and bone ingrowth inside their porous tantalum sections.
Cortical and apical implant threads, combined with the porous section, were able to stabilize the experimental implant to the same degree as the fully threaded control implant.
研究一种中段覆盖三维多孔钽材料的牙种植体系统是否具有与传统螺纹钛合金种植体系统相当的稳定性,以及骨是否会生长到多孔部分。
将 3 个实验组和 3 个对照组植入 8 只狗的下颌骨中。共振频率分析在愈合的 0、2、4、8 和 12 周评估种植体稳定性。组织形态计量学和背散射扫描电子显微镜分析检查了骨向内生长到实验种植体多孔部分的情况,以及在两个种植体的钛表面的骨与种植体接触情况。
在愈合的 0 至 12 周期间,种植体稳定性没有显著差异。从第 2 周到第 12 周,多孔部分逐渐发生组织矿化。多孔种植体表现出沿其钛表面逐渐骨整合与多孔钽部分内骨向内生长的结合。
皮质和根尖种植体螺纹与多孔部分相结合,能够使实验种植体达到与全螺纹对照种植体相同的稳定性。