Suppr超能文献

同一口腔内植入 TiUnite 和非 TiUnite 牙种植体的长期临床和影像学回顾性分析:两项中心研究

A two-center retrospective analysis of long-term clinical and radiologic data of TiUnite and turned implants placed in the same mouth.

出版信息

Int J Prosthodont. 2013 Jul-Aug;26(4):350-8. doi: 10.11607/ijp.3386.

Abstract

PURPOSE

The gradual shift from using implants with turned surfaces to implants with moderately rough surfaces has raised questions regarding the long-term behavior of the latter. The aim of the present retrospective study was to compare clinical and radiographic data of the two implant surfaces using the "same mouth" approach.

MATERIALS AND METHODS

A total of 122 consecutive patients were treated with both turned and TiUnite implants; however, 26 of these patients could not be reached for follow-up and were excluded from the study. The remaining 96 patients received 257 turned and 243 TiUnite Brånemark System implants, not necessarily supporting the same constructions and not necessarily inserted during the same session. Data were collected up to 10 years of function.

RESULTS

During the first 6-year period, 18 turned implants and 1 TiUnite implant failed, resulting in implant cumulative survival rates (CSRs) of 93.0% and 99.1% for turned and TiUnite implants, respectively. During the following years, 1 turned and 3 TiUnite implants failed, resulting in CSRs of 90.3% and 96.6% for the two surfaces, respectively, a significant difference. A small but significant difference in mean bone level was seen between turned and TiUnite implants.

CONCLUSION

Implants with turned and TiUnite surfaces showed comparable clinical and radiographic data during the study period. The early implant failure rate, as well as the overall failure rate, were significantly reduced when using TiUnite implants.

摘要

目的

从使用表面经机械打磨的种植体逐渐过渡到使用表面经适度粗糙化处理的种植体,这引发了人们对后者长期性能的疑问。本回顾性研究旨在采用“同一患者”方法,比较两种种植体表面的临床和影像学数据。

材料和方法

共对 122 例连续患者同时使用经机械打磨和 TiUnite 种植体进行治疗,但其中 26 例患者无法联系进行随访而被排除在研究之外。剩余的 96 例患者共植入 257 个经机械打磨的和 243 个 TiUnite Brånemark 系统种植体,这些种植体不一定支持相同的修复体,也不一定在同一时间段内植入。数据收集时间最长达 10 年。

结果

在最初的 6 年期间,18 个经机械打磨的种植体和 1 个 TiUnite 种植体失败,导致经机械打磨的和 TiUnite 种植体的种植体累积生存率(CSR)分别为 93.0%和 99.1%。在随后的几年中,1 个经机械打磨的和 3 个 TiUnite 种植体失败,导致这两种表面的 CSR 分别为 90.3%和 96.6%,存在显著差异。经机械打磨的和 TiUnite 种植体之间的平均骨水平存在微小但显著的差异。

结论

在研究期间,经机械打磨和 TiUnite 表面的种植体显示出相似的临床和影像学数据。使用 TiUnite 种植体可显著降低早期种植体失败率和总失败率。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验