Ibáñez Ana L, Rodríguez-Canto Antonio, Cortés-Martínez Jasmín, García-Calderón José L
Universidad Autónoma Metropolitana-Iztapalapa, Departamento de Hidrobiologia, Av. San Rafael Atlixco 186, Col. Vicentina. Mexico, D.F. 09340, Mexico.
Rev Biol Trop. 2013 Mar;61(1):193-201. doi: 10.15517/rbt.v61i1.10946.
The use of alizarin red S (ARS) marked tilapias could provide valuable fisheries management information to evaluate fish stocking events and may facilitate aquaculture management practices. As a new technique in fishes, the aim of this study was to compare and evaluate the chemical marks produced in tilapia juveniles by ARS through two treatments: 1) 12 hours of immersion and 2) immersion after osmotic induction. This was analyzed at three concentrations: 50, 75 and 100mg/l, and in three structures: otoliths, fish scales and caudal fin rays of Oreochromis niloticus juveniles. After three culture months 80% of specimens were analyzed and significant differences (p<0.05) in mark intensity were detected between treatments for otoliths and fin rays, but not for fish scales. Significant differences between concentrations were found for the 12h immersion treatment, while no significant differences were detected with osmotic induction. Our results showed that marks appeared at all concentrations, and none of the concentrations produced weak marks. Osmotic induction had a greater mortality than the 12h immersion procedure. After eight culture months the rest of the specimens were analyzed and the mark permanence was observed in all cases. According to the present results we recommend the marking process of 12h immersion treatment at 100mg/L concentration.
使用茜素红S(ARS)标记罗非鱼可为评估鱼类放流活动提供有价值的渔业管理信息,并可能有助于水产养殖管理实践。作为鱼类的一项新技术,本研究的目的是通过两种处理方式比较和评估ARS在罗非鱼幼鱼中产生的化学标记:1)浸泡12小时;2)渗透诱导后浸泡。在三种浓度(50、75和100mg/l)下,对尼罗罗非鱼幼鱼的三种结构(耳石、鱼鳞和尾鳍条)进行了分析。养殖三个月后,对80%的样本进行了分析,发现耳石和鳍条的处理之间在标记强度上存在显著差异(p<0.05),但鱼鳞没有。在12小时浸泡处理中发现浓度之间存在显著差异,而渗透诱导未检测到显著差异。我们的结果表明,所有浓度下都出现了标记,且没有一个浓度产生微弱标记。渗透诱导的死亡率高于12小时浸泡程序。养殖八个月后,对其余样本进行了分析,在所有情况下都观察到了标记的持久性。根据目前的结果,我们建议采用100mg/L浓度的12小时浸泡处理进行标记。