Liquid mixtures involving hydrogenated and fluorinated chains: (p, ρ, T, x) surface of (ethanol + 2,2,2-trifluoroethanol), experimental and simulation.

The effect of mixing hydrogenated and fluorinated molecules that simultaneously interact through strong hydrogen bonding was investigated: (ethanol + 2,2,2-trifluoroethanol) binary mixtures were studied both experimentally and by computer simulation. This mixture displays a very complex behavior when compared with mixtures of hydrogenated alcohols and mixtures of alkanes and perfluoroalkanes. The excess volumes are large and positive (unlike those of mixtures of hydrogenated alchools), while the excess enthalpies are large and negative (contrasting with those of mixtures of alkanes and perfluoroalkanes). In this work, the liquid density of the mixtures was measured as a function of composition, at several temperatures from 278.15 to 353.15 K and from atmospheric pressure up to 70 MPa. The corresponding excess molar volumes, compressibilities, and expansivities were calculated over the whole (p, ρ, T, x) surface. In order to obtain molecular level insight, the behavior of the mixture was also studied by molecular dynamics simulation, using the OPLS-AA force field. The combined analysis of the experimental and simulation results indicates that the peculiar phase behavior of this system stems from a balance between the weak dispersion forces between the hydrogenated and fluorinated groups and a preferential hydrogen bond between ethanol and 2,2,2-trifluoroethanol. Additionally, it was observed that a 25% reduction of the F-H dispersive interaction in the simulations brings agreement between the experimental and simulated excess enthalpy but produces no effect in the excess volumes. This reveals that the main reason causing the volume increase in these systems is not entirely related to the weak dispersive interactions, as it is usually assumed, and should thus be connected to the repulsive part of the intermolecular potential.