Xiaochuan Huo, Xiaoyun S, Junsheng Luo, Ning Guan, Wenshi Guo, Zhenxing Zhang
The First Affiliated Hospital of Liaoning Medical University; Jinzhou, Liaoning, China - E-mail:
Interv Neuroradiol. 2013 Sep;19(3):359-64. doi: 10.1177/159101991301900314. Epub 2013 Sep 26.
Percutaneous microballoon compression (PMC) is a well-established technique for treatment of trigeminal neuralgia (TN). However, direct puncture of the foramen ovale (FO) is sometimes difficult and there have been well-reported complications from cannulating the FO. We describe our experiences in using Dyna-CT for cannulating the FO and determining balloon position and volume. Dyna-CT was used to perform image reconstruction in 21 cases. The optimal working projection was generated and further fluoroscopic data were used to determine the needle's relationship to the foramen during puncture. Furthermore, the balloon position and three-dimensional shape were verified by Dyna-CT during balloon compression. The balloon volume and puncture angle were further calculated. Patients' prognosis was further discussed. Dyna-CT allowed quick, safe, and easy cannulation of the FO. It provided three-dimensional images which were more elaborate than the classic 'pear-shaped' images for determining correct positioning in 21 cases. The volume of the flattened balloon ranged from 568.2 mm(3) to 891.4 mm(3) with an average of 775.9 mm(3). The angle of introducing the cannula ranged from 15.17°-35.48° rotation to the midline with an average of 26.24° and 38.47°-51.89° angulation to the Reid line with an average of 46.09°. All the patients were pain free after PMC. Four patients had resolvable masseter weakness and fine touch loss. There was no recurrence of TN during follow-up. Dyna-CT demonstrated three advantages in assisting PMC. Firstly, the FO can be better visualized irrespective of the patient's position. Secondly, needle correction or insertion can be performed much more easily because of the direct fluoroscopic control. Thirdly, the needle position, balloon position, balloon configuration and the volume of the inflated balloon are more reliably determined. The use of dyna-CT provided an assisted method to PMC with a low incidence of complications and good prognosis.
经皮微球囊压迫术(PMC)是一种成熟的治疗三叉神经痛(TN)的技术。然而,卵圆孔(FO)的直接穿刺有时很困难,并且经FO插管引发的并发症已有大量报道。我们描述了使用动态CT进行FO插管以及确定球囊位置和体积的经验。动态CT用于21例患者的图像重建。生成了最佳工作投影,并使用进一步的荧光透视数据来确定穿刺过程中针与孔的关系。此外,在球囊压迫期间通过动态CT验证球囊位置和三维形状。进一步计算球囊体积和穿刺角度。对患者的预后进行了进一步讨论。动态CT使FO插管快速、安全且容易。它提供的三维图像比经典的“梨形”图像更精细,有助于在21例患者中确定正确的定位。扁平球囊的体积范围为568.2立方毫米至891.4立方毫米,平均为775.9立方毫米。插管的角度为与中线旋转15.17° - 35.48°,平均为26.24°,与瑞迪线成角38.47° - 51.89°,平均为46.09°。所有患者在PMC术后均无疼痛。4例患者出现可缓解的咬肌无力和精细触觉丧失。随访期间TN无复发。动态CT在辅助PMC方面显示出三个优点。首先,无论患者体位如何,FO都能更好地可视化。其次,由于直接的荧光透视控制,针的校正或插入更容易进行。第三,针的位置、球囊位置、球囊形态以及膨胀球囊的体积能更可靠地确定。动态CT的使用为PMC提供了一种辅助方法,并发症发生率低且预后良好。