Zdilla Matthew J, Hatfield Scott A, McLean Kennedy A, Laslo Jillian M, Cyrus Leah M, Lambert H Wayne
*Department of Natural Sciences and Mathematics †Department of Graduate Health Sciences, West Liberty University, West Liberty ‡Department of Neurobiology and Anatomy, Robert C. Byrd Health Sciences Center, West Virginia University School of Medicine, Morgantown, WV.
J Craniofac Surg. 2016 Jan;27(1):234-7. doi: 10.1097/SCS.0000000000002332.
Unsuccessful cannulation of the foramen ovale (FO) continues to occur with both fluoroscopic technique and technique using computed tomography paired with navigational technology. Despite advances in stereotactic neurosurgical imaging and technique, anatomic variation of the FO occasionally prevents successful cannulation. Morphometric study of the FO has been limited to length, width, and area parameters; therefore, this report analyzed the orientation of the FO. A total of 139 crania (235 foramina ovalae) were photographed and assessed digitally by ImageJ software (NIH). Foramina were fit with a best fit ellipse. For orientation, the midsagittal plane was located by bisecting the basilar process of the occiput; the coronal plane was identified as perpendicular to the midsagittal plane. The angles between the major axis of the best fit ellipse of the FO and the midsagittal and coronal planes were measured. The angle formed between the major axis of the best fit ellipse of the FO and the coronal plane averaged 35.43° ± 9.74° (mean ± SD) on the left and 36.47° ± 7.60° on the right. The angle formed between the major axis of the best fit ellipse of the FO and the sagittal plane averaged 54.57° ± 9.74° on the left and 53.53° ± 7.60° on the right. No significant difference was found between FO orientation among the sexes. Understanding the orientation of the FO may aid in stereotactic neurosurgical planning and successful cannulation of the FO.
卵圆孔(FO)插管失败在荧光镜检查技术以及计算机断层扫描与导航技术结合的技术中仍时有发生。尽管立体定向神经外科成像和技术取得了进展,但卵圆孔的解剖变异偶尔会妨碍插管成功。对卵圆孔的形态测量研究仅限于长度、宽度和面积参数;因此,本报告分析了卵圆孔的方向。共拍摄了139个颅骨(235个卵圆孔),并通过ImageJ软件(美国国立卫生研究院)进行数字评估。卵圆孔拟合最佳拟合椭圆。对于方向,通过将枕骨基底过程二等分来确定正中矢状面;冠状面被确定为垂直于正中矢状面。测量卵圆孔最佳拟合椭圆的长轴与正中矢状面和冠状面之间的角度。卵圆孔最佳拟合椭圆的长轴与冠状面之间形成的角度在左侧平均为35.43°±9.74°(平均值±标准差),在右侧为36.47°±7.60°。卵圆孔最佳拟合椭圆的长轴与矢状面之间形成的角度在左侧平均为54.57°±9.74°,在右侧为53.53°±7.60°。在性别之间的卵圆孔方向上未发现显著差异。了解卵圆孔的方向可能有助于立体定向神经外科手术规划和卵圆孔的成功插管。