Suppr超能文献

髋关节置换术中髋臼部件位置的准确性。

Accuracy of acetabular component position in hip arthroplasty.

机构信息

Department of Orthopaedic Surgery, Washington University School of Medicine, 660 South Euclid Avenue, Campus Box 8233, St. Louis, MO 63110. E-mail address for R.L. Barrack:

出版信息

J Bone Joint Surg Am. 2013 Oct 2;95(19):1760-8. doi: 10.2106/JBJS.L.01704.

Abstract

BACKGROUND

Acetabular component malposition is linked to higher bearing surface wear and component instability. Outcomes following total hip arthroplasty and surface replacement arthroplasty depend on multiple surgeon and patient-dependent factors. The purpose of this study was to examine the frequency in which acetabular components are placed within a predetermined target range.

METHODS

We evaluated postoperative anteroposterior pelvic radiographs for every consecutive primary total hip arthroplasty and surface replacement arthroplasty completed from 2004 to 2009 at a single institution. Acetabular component abduction and anteversion angles were determined using Martell Hip Analysis Suite software. We defined target ranges for abduction and anteversion for both total hip arthroplasty (30° to 55° and 5° to 35°, respectively) and surface replacement arthroplasty (30° to 50° and 5° to 25°, respectively). Surgeon and patient-related factors were analyzed for risk associated with placing the acetabular component outside the target range.

RESULTS

Of the 1549 total hip arthroplasties, 1435 components (93%) met our abduction target, 1472 (95%) met our anteversion target, and 1363 (88%) simultaneously met both targets. Of the 263 surface replacement arthroplasties, 233 components (89%) met our abduction target, 247 (94%) met our anteversion target, and 220 (84%) simultaneously met both targets. When previously published target ranges of abduction (30° to 45°) and anteversion (5° to 25°) angles were used, only 665 total hip replacements (43%) met the abduction target, 1325 (86%) met the anteversion target, and 584 (38%) simultaneously met both targets. Of the surface replacement arthroplasties, 181 (69%) met the abduction target, 247 (94%) met the anteversion target, and 172 (65%) simultaneously met both targets. Low-volume surgeons were 2.16 times more likely to miss target component position compared with high-volume surgeons (p = 0.002). The odds of missing the target increased by ≥ 0.2 for every 5 kg/m2 increase in body mass index. Minimally invasive approaches, diagnosis, years of surgical experience, femoral head size, and age of the patient did not affect component position.

CONCLUSIONS

Increased odds of component malposition were found with lower-volume surgeons and higher body mass index. No other variables had a significant effect on component placement.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

摘要

背景

髋臼部件位置不当与更高的承载面磨损和部件不稳定有关。全髋关节置换术和表面置换术的结果取决于多个外科医生和患者相关因素。本研究的目的是检查髋臼部件在预定目标范围内的放置频率。

方法

我们评估了 2004 年至 2009 年在一家机构进行的每一例连续初次全髋关节置换术和表面置换术的术后前后骨盆 X 线片。髋臼部件外展角和前倾角使用 Martell Hip Analysis Suite 软件确定。我们为全髋关节置换术(分别为 30°至 55°和 5°至 35°)和表面置换术(分别为 30°至 50°和 5°至 25°)定义了髋臼部件的目标范围。分析了外科医生和患者相关因素与髋臼部件放置在目标范围之外的风险相关。

结果

在 1549 例全髋关节置换术中,1435 个(93%)部件符合我们的外展目标,1472 个(95%)符合我们的前倾角目标,1363 个(88%)同时符合这两个目标。在 263 例表面置换术中,233 个(89%)部件符合我们的外展目标,247 个(94%)符合我们的前倾角目标,220 个(84%)同时符合这两个目标。当使用先前发表的外展(30°至 45°)和前倾角(5°至 25°)角度的目标范围时,只有 665 例全髋关节置换术(43%)符合外展目标,1325 例(86%)符合前倾角目标,584 例(38%)同时符合这两个目标。在表面置换术中,181 个(69%)符合外展目标,247 个(94%)符合前倾角目标,172 个(65%)同时符合这两个目标。低容量外科医生的组件位置错过目标的可能性是高容量外科医生的 2.16 倍(p=0.002)。每增加 5 公斤/平方米的体重指数,错过目标的可能性就会增加≥0.2。微创入路、诊断、手术经验年限、股骨头大小和患者年龄均不影响部件位置。

结论

低容量外科医生和较高的体重指数与组件错位的几率增加有关。其他变量对部件放置没有显著影响。

证据水平

治疗 III 级。有关证据水平的完整描述,请参阅作者说明。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验