Instituto de Agroquímica y Tecnología de Alimentos (IATA-CSIC) , Av. Agustín Escardino 7, 46980 Paterna (Valencia), Spain.
J Agric Food Chem. 2013 Nov 13;61(45):10708-13. doi: 10.1021/jf403728r. Epub 2013 Oct 29.
To quantify fluoride in food it is necessary to extract the fluoride from the matrix. Dry ashing (alkali fusion) and facilitated diffusion are the methods most commonly used, but their application requires lengthy treatments. The present study proposes the use of a microwave oven and 7 mol/L nitric acid for simple, rapid digestion of foods for fluoride analysis. The analyte is subsequently quantified by fluoride ion-selective electrode. The various steps of the method were optimized and an in-house validation was performed. The limit of quantification (0.130 mg/kg), trueness (92%), recovery (84-101%), and precision (1-8%) were determined. These analytical characteristics are satisfactory and show the suitability of the method for analysis of fluoride in foods of various kinds. The method's ease of application and the use of equipment normally found in food analysis laboratories may help to further increase research on fluoride concentrations in foods consumed by the population.
要定量分析食品中的氟化物,必须从基质中提取氟化物。干法灰化(碱熔合)和促进扩散是最常用的方法,但它们的应用需要长时间的处理。本研究提出了使用微波炉和 7mol/L 硝酸对食品进行简单、快速的消化,以便进行氟化物分析。随后通过氟离子选择性电极定量分析分析物。对该方法的各个步骤进行了优化,并进行了内部验证。确定了定量限(0.130mg/kg)、准确度(92%)、回收率(84-101%)和精密度(1-8%)。这些分析特性令人满意,表明该方法适用于各种食品中氟化物的分析。该方法易于应用,且使用食品分析实验室中通常配备的设备,这可能有助于进一步增加对人群食用食品中氟化物浓度的研究。