Department of Chemistry, University of Washington , Box 351700, Seattle, Washington 98195-1700, United States.
Inorg Chem. 2013 Nov 4;52(21):12383-93. doi: 10.1021/ic401234t. Epub 2013 Oct 24.
Hydrogen-atom-transfer (HAT) reactions are a class of proton-coupled electron-transfer (PCET) reactions used in biology to promote substrate oxidation. The driving force for such reactions depends on both the oxidation potential of the catalyst and the pKa value of the proton-acceptor site. Both high-valent transition-metal oxo M(IV)═O (M = Fe, Mn) and lower-valent transition-metal hydroxo compounds M(III)OH (M = Fe, Mn) have been shown to promote these reactions. Herein we describe the synthesis, structure, and reactivity properties of a series of Mn(III)OR compounds [R = (p)NO2Ph (5), Ph (6), Me (7), H (8)], some of which abstract H atoms. The Mn(III)OH complex 8 is water-soluble and represents a rare example of a stable mononuclear Mn(III)OH. In water, the redox potential of 8 was found to be pH-dependent and the Pourbaix (E(p,c) vs pH) diagram has a slope (52 mV pH(-1)) that is indicative of the transfer a single proton with each electron (i.e., PCET). The two compounds with the lowest oxidation potential, hydroxide- and methoxide-bound 7 and 8, are found to oxidize 2,2',6,6'-tetramethylpiperidin-1-ol (TEMPOH), whereas the compounds with the highest oxidation potential, phenol-ligated 5 and 6, are shown to be unreactive. Hydroxide-bound 8 reacts with TEMPOH an order of magnitude faster than methoxide-bound 7. Kinetic data [kH/kD = 3.1 (8); kH/kD = 2.1 (7)] are consistent with concerted H-atom abstraction. The reactive species 8 can be aerobically regenerated in H2O, and at least 10 turnovers can be achieved without significant degradation of the "catalyst". The linear correlation between the redox potential and pH, obtained from the Pourbaix diagram, was used to calculate the bond dissociation free energy (BDFE) = 74.0 ± 0.5 kcal mol(-1) for Mn(II)OH2 in water, and in MeCN, its BDFE was estimated to be 70.1 kcal mol(-1). The reduced protonated derivative of 8, Mn(II)(S(Me2)N4(tren))(H2O) (9), was estimated to have a pKa of 21.2 in MeCN. The ability (7) and inability (5 and 6) of the other members of the series to abstract a H atom from TEMPOH was used to estimate either an upper or lower limit to the Mn(II)O(H)R pKa based on their experimentally determined redox potentials. The trend in pKa [21.2 (R = H) > 16.2 (R = Me) > 13.5 (R = Ph) > 12.2 (R = (p)NO2Ph)] is shown to oppose that of the oxidation potential E(p,c) [-220 (R = (p)NO2Ph) > -300 (R = Ph) > -410 (R = Me) > -600 (R = H) mV vs Fc(+/0)] for this particular series.
氢原子转移 (HAT) 反应是一类在生物学中用于促进底物氧化的质子偶联电子转移 (PCET) 反应。这种反应的驱动力取决于催化剂的氧化电位和质子接受体位点的 pKa 值。高氧化态过渡金属氧代 M(IV)═O (M = Fe、Mn) 和低氧化态过渡金属羟化物化合物 M(III)OH (M = Fe、Mn) 都被证明可以促进这些反应。本文描述了一系列 Mn(III)OR 化合物[R = (p)NO2Ph(5)、Ph(6)、Me(7)、H(8)]的合成、结构和反应性质,其中一些可以提取 H 原子。Mn(III)OH 配合物 8 是水溶性的,代表了稳定单核 Mn(III)OH 的罕见例子。在水中,8 的氧化还原电位被发现是 pH 依赖性的,并且 Pourbaix(E(p,c) vs pH)图具有斜率(52 mV pH(-1)),表明每电子转移一个质子(即 PCET)。氧化还原电位最低的两种化合物,氢氧化物和甲氧基结合的 7 和 8,被发现可以氧化 2,2',6,6'-四甲基哌啶-1-醇(TEMPOH),而氧化还原电位最高的两种化合物,苯酚配位的 5 和 6,则表现出不反应。氢氧根结合的 8 与 TEMPOH 的反应速度比甲氧基结合的 7 快一个数量级。动力学数据[kH/kD = 3.1(8); kH/kD = 2.1(7)]与协同 H 原子提取一致。有氧存在时,反应性物种 8 可以在 H2O 中再生,并且在没有明显催化剂降解的情况下可以实现至少 10 次周转。从 Pourbaix 图获得的氧化还原电位与 pH 的线性相关性用于计算 Mn(II)OH2 在水中的键离解自由能(BDFE) = 74.0 ± 0.5 kcal mol(-1),在 MeCN 中,其 BDFE 估计为 70.1 kcal mol(-1)。8 的还原质子化衍生物[Mn(II)(S(Me2)N4(tren))(H2O)]+(9),在 MeCN 中的 pKa 估计为 21.2。该系列其他成员从 TEMPOH 中提取 H 原子的能力(7)和无能(5 和 6)被用来估计基于实验确定的氧化还原电位的 Mn(II)O(H)R pKa 的上限或下限。pKa [21.2(R = H) > 16.2(R = Me) > 13.5(R = Ph) > 12.2(R = (p)NO2Ph)]的趋势与氧化电位 E(p,c)[-220(R = (p)NO2Ph) > -300(R = Ph) > -410(R = Me) > -600(R = H) mV vs Fc(+/0)]相反,对于这个特定的系列。