Laboratorio de Microbiología de Alimentos, Departamento de Química Orgánica, Facultad de Ciencias Exactas y Naturales, UBA, Buenos Aires, Argentina.
Food Microbiol. 2014 Apr;38:276-83. doi: 10.1016/j.fm.2013.07.012. Epub 2013 Aug 11.
The objectives of this study were i) to determine the effects of the interactions of water activity, temperature and incubation time on the co-production of AFB1 and CPA by isolates of Aspergillus flavus with different profile of mycotoxin production and ii) to identify the aW and temperature limiting conditions for the production of both mycotoxins. Fungi used in this study were selected because they belonged to different chemotypes: chemotype I (AFB1+/CPA+), III (AFB1+/CPA-) and IV (AFB1-/CPA+), respectively. Two culture media were used; Czapek yeast agar (CYA) and corn extract agar (CEM), at different incubated temperatures (10-40 °C) and aW levels (0.80-0.98). AFB1 and CPA production were analyzed after 7, 14, 21 and 28 days of incubation. Significant differences were observed with respect to mycotoxin production depending on the media evaluated. The AFB1 production occurred more favorably on CYA while the highest CPA concentrations were recorded on CEM. Within the range of aW evaluated in this study, 0.83 was the limiting level for both toxins production. The optimum conditions for AFB1 production occurred at 0.96 aW and 30 °C after 21 days of incubation, regardless of the media and isolate. Although different amounts of toxins were produced in each medium, the limiting and optimum conditions for their production were similar in both. No differences in the response of the three isolates to the abiotic factors discussed were observed despite belonging to different chemotypes. The determination of the thresholds of mycotoxins co-production, especially in the case of data obtained with the corn extract medium can be useful to avoid the conditions conducive to co-occurrence of these mycotoxins in corn.
i)确定水分活度、温度和培养时间的相互作用对不同产毒真菌组合产生 AFB1 和 CPA 的影响,ii)确定产生两种霉菌毒素的水分活度和温度限制条件。本研究中使用的真菌是根据其不同的产毒表型选择的,它们分别属于不同的化学型:化学型 I(AFB1+/CPA+)、III(AFB1+/CPA-)和 IV(AFB1-/CPA+)。使用了两种培养基;察氏酵母琼脂(CYA)和玉米浸出琼脂(CEM),在不同的培养温度(10-40°C)和水分活度(0.80-0.98)下。在 7、14、21 和 28 天的培养后分析了 AFB1 和 CPA 的产生情况。结果表明,产毒情况因所评估的培养基而异而有所不同。在 CYA 上更有利于产生 AFB1,而在 CEM 上记录到的 CPA 浓度最高。在本研究中评估的水分活度范围内,0.83 是两种毒素产生的限制水平。在 0.96 的水分活度和 30°C 下,经过 21 天的培养,无论使用哪种培养基和真菌,都有利于 AFB1 的产生。尽管在每种培养基中产生的毒素数量不同,但产生毒素的限制和最佳条件在两种培养基中相似。尽管属于不同的化学型,但三个真菌分离株对讨论的非生物因素的反应没有差异。确定这些霉菌毒素共产生的阈值,特别是在玉米浸出培养基获得的数据情况下,可以有助于避免玉米中这些霉菌毒素共发生的条件。