Bequette B Wayne
Department of Chemical and Biological Engineering, Rensselaer Polytechnic Institute, 110 Eighth Street, Troy, NY 12180-3590.
J Diabetes Sci Technol. 2013 Nov 1;7(6):1632-43. doi: 10.1177/193229681300700624.
The relative merits of model predictive control (MPC) and proportional-integral-derivative (PID) control are discussed, with the end goal of a closed-loop artificial pancreas (AP). It is stressed that neither MPC nor PID are single algorithms, but rather are approaches or strategies that may be implemented very differently by different engineers. The primary advantages to MPC are that (i) constraints on the insulin delivery rate (and/or insulin on board) can be explicitly included in the control calculation; (ii) it is a general framework that makes it relatively easy to include the effect of meals, exercise, and other events that are a function of the time of day; and (iii) it is flexible enough to include many different objectives, from set-point tracking (target) to zone (control to range). In the end, however, it is recognized that the control algorithm, while important, represents only a portion of the effort required to develop a closed-loop AP. Thus, any number of algorithms/approaches can be successful--the engineers involved in the design must have experience with the particular technique, including the important experience of implementing the algorithm in human studies and not simply through simulation studies.
讨论了模型预测控制(MPC)和比例积分微分(PID)控制的相对优点,最终目标是实现闭环人工胰腺(AP)。需要强调的是,MPC和PID都不是单一的算法,而是不同工程师可能以非常不同的方式实现的方法或策略。MPC的主要优点包括:(i)胰岛素输注速率(和/或体内胰岛素量)的约束可以明确纳入控制计算中;(ii)它是一个通用框架,相对容易纳入饮食、运动以及其他随一天中的时间变化的事件的影响;(iii)它足够灵活,可以纳入许多不同的目标,从设定点跟踪(目标)到区域控制(控制在范围内)。然而,最终人们认识到,控制算法虽然很重要,但只是开发闭环人工胰腺所需努力的一部分。因此,任何数量的算法/方法都可能成功——参与设计的工程师必须具备使用特定技术的经验,包括在人体研究中而不仅仅是通过模拟研究来实现该算法的重要经验。