Department of Food and Environmental Sciences, University of Helsinki, PO 27, 00014 Helsinki, Finland.
Biotechnol Biofuels. 2014 Feb 21;7(1):27. doi: 10.1186/1754-6834-7-27.
Enzymes still comprise a major part of ethanol production costs from lignocellulose raw materials. Irreversible binding of enzymes to the residual substrate prevents their reuse and no efficient methods for recycling of enzymes have so far been presented. Cellulases without a carbohydrate-binding module (CBM) have been found to act efficiently at high substrate consistencies and to remain non-bound after the hydrolysis.
High hydrolysis yields could be obtained with thermostable enzymes of Thermoascus aurantiacus containing only two main cellulases: cellobiohydrolase I (CBH I), Cel7A and endoglucanase II (EG II), Cel5A. The yields were decreased by only about 10% when using these cellulases without CBM. A major part of enzymes lacking CBM was non-bound during the most active stage of hydrolysis and in spite of this, produced high sugar yields. Complementation of the two cellulases lacking CBM with CBH II (CtCel6A) improved the hydrolysis. Cellulases without CBM were more sensitive during exposure to high ethanol concentration than the enzymes containing CBM. Enzymes lacking CBM could be efficiently reused leading to a sugar yield of 90% of that with fresh enzymes. The applicability of cellulases without CBM was confirmed under industrial ethanol production conditions at high (25% dry matter (DM)) consistency.
The results clearly show that cellulases without CBM can be successfully used in the hydrolysis of lignocellulose at high consistency, and that this approach could provide new means for better recyclability of enzymes. This paper provides new insight into the efficient action of CBM-lacking cellulases. The relationship of binding and action of cellulases without CBM at high DM consistency should, however, be studied in more detail.
酶仍然是木质纤维素原料生产乙醇的主要成本组成部分。酶不可逆地与残余底物结合,阻止了它们的再利用,迄今为止,还没有有效的酶回收方法。已经发现没有碳水化合物结合模块(CBM)的纤维素酶在高底物浓度下能有效地发挥作用,并且在水解后仍然不会被结合。
含有仅两种主要纤维素酶的嗜热真菌Thermoascus aurantiacus 的热稳定酶,即纤维二糖水解酶 I(CBH I)、Cel7A 和内切葡聚糖酶 II(EG II)、Cel5A,可获得高水解产率。当使用没有 CBM 的这些纤维素酶时,产率仅下降约 10%。在水解最活跃的阶段,很大一部分缺乏 CBM 的酶没有被结合,但仍产生了高糖产率。用 CBH II(CtCel6A)补充缺乏 CBM 的两种纤维素酶可提高水解效率。缺乏 CBM 的纤维素酶在暴露于高乙醇浓度下比含有 CBM 的酶更敏感。缺乏 CBM 的酶可以有效地重复使用,导致糖产率达到新鲜酶的 90%。在高(25%干物质(DM))浓度下的工业乙醇生产条件下,证实了缺乏 CBM 的纤维素酶的适用性。
结果清楚地表明,缺乏 CBM 的纤维素酶可以成功地用于高浓度木质纤维素的水解,并且这种方法可以为更好地回收酶提供新的手段。本文为缺乏 CBM 的纤维素酶的高效作用提供了新的见解。然而,应该更详细地研究在高 DM 浓度下缺乏 CBM 的纤维素酶的结合和作用关系。