Characterization of cancellous and cortical bone strain in the in vivo mouse tibial loading model using microCT-based finite element analysis.

The in vivo mouse tibial loading model has been increasingly used to understand the mechanisms governing the mechanobiological responses of cancellous and cortical bone tissues to physical stimuli. Accurate characterization of the strain environment throughout the tibia is fundamental in relating localized mechanobiological processes to specific strain stimuli in the skeleton. MicroCT-based finite element analysis, together with diaphyseal strain gauge measures, was conducted to quantify the strain field in the tibiae of 16-wk-old female C57Bl/6 mice during in vivo dynamic compressive loading. Despite a strong correlation between the experimentally-measured and computationally-modeled strains at the gauge site, no correlations existed between the strain at the gauge site and the peak strains in the proximal cancellous and midshaft cortical bone, indicating the limitations of using a single diaphyseal strain gauge to estimate strain in the entire tibia. The peak compressive and tensile principal strain magnitudes in the proximal cancellous bone were 10% and 34% lower than those in the midshaft cortical bone. Sensitivity analyses showed that modeling bone tissue as a heterogeneous material had a strong effect on cancellous strain characterization while cortical strain and whole-bone stiffness were primarily affected by the presence of the fibula and the proximal boundary conditions. These results show that microCT-based finite element analysis combined with strain gauge measures provides detailed resolution of the tissue-level strain in both the cancellous and cortical bones of the mouse tibia during in vivo compression loading, which is necessary for interpreting localized patterns of modeling/remodeling and, potentially, gene and protein expression in skeletal mechanobiology studies.