Gamm U A, Hoy C L, van Leeuwen-van Zaane F, Sterenborg H J C M, Kanick S C, Robinson D J, Amelink A
Center for Optical Diagnostics and Therapy, Department of Radiation Oncology, Postgraduate school Molecular Medicine, Erasmus Medical Center, PO Box 2040, 3000 CA Rotterdam, The Netherlands.
Thayer School of Engineering, Dartmouth College, 8000 Cummings Hall, Hanover, New Hampshire 03755, USA.
Biomed Opt Express. 2014 May 22;5(6):1913-25. doi: 10.1364/BOE.5.001913. eCollection 2014 Jun 1.
The detailed mechanisms associated with the influence of scattering and absorption properties on the fluorescence intensity sampled by a single optical fiber have recently been elucidated based on Monte Carlo simulated data. Here we develop an experimental single fiber fluorescence (SFF) spectroscopy setup and validate the Monte Carlo data and semi-empirical model equation that describes the SFF signal as a function of scattering. We present a calibration procedure that corrects the SFF signal for all system-related, wavelength dependent transmission efficiencies to yield an absolute value of intrinsic fluorescence. The validity of the Monte Carlo data and semi-empirical model is demonstrated using a set of fluorescent phantoms with varying concentrations of Intralipid to vary the scattering properties, yielding a wide range of reduced scattering coefficients (μ's = 0-7 mm (-1)). We also introduce a small modification to the model to account for the case of μ's = 0 mm (-1) and show its relation to the experimental, simulated and theoretically calculated value of SFF intensity in the absence of scattering. Finally, we show that our method is also accurate in the presence of absorbers by performing measurements on phantoms containing red blood cells and correcting for their absorption properties.
最近,基于蒙特卡罗模拟数据,阐明了散射和吸收特性对单根光纤采集的荧光强度影响的详细机制。在此,我们开发了一种实验性单光纤荧光(SFF)光谱装置,并验证了将SFF信号描述为散射函数的蒙特卡罗数据和半经验模型方程。我们提出了一种校准程序,该校准程序针对所有与系统相关的、波长依赖的传输效率校正SFF信号,以得到固有荧光的绝对值。使用一组含有不同浓度Intralipid以改变散射特性的荧光体模,验证了蒙特卡罗数据和半经验模型的有效性,得到了宽范围的约化散射系数(μ's = 0 - 7 mm(-1))。我们还对模型进行了微小修改,以考虑μ's = 0 mm(-1)的情况,并展示了其与无散射时SFF强度的实验值、模拟值和理论计算值的关系。最后,我们通过对含有红细胞的体模进行测量并校正其吸收特性,表明我们的方法在存在吸收体的情况下也是准确的。