Strauss Jillian, Miranda-Moreno Luis F, Morency Patrick
Department of Civil Engineering and Applied Mechanics, McGill University, Macdonald Engineering Building, 817 Sherbrooke Street West, Montréal, Quebec H3A 0C3 Canada.
Department of Social and Preventive Medicine, Université de Montréal, Montreal Department of Public Health, 1301 Sherbrooke Street East, Montréal, Quebec H2L 1M3, Canada.
Accid Anal Prev. 2014 Oct;71:201-9. doi: 10.1016/j.aap.2014.05.015. Epub 2014 Jun 17.
This paper proposes a multimodal approach to study safety at intersections by simultaneously analysing the safety and flow outcomes for both motorized and non-motorized traffic. This study uses an extensive inventory of signalized and non-signalized intersections on the island of Montreal, Quebec, Canada, containing disaggregate motor-vehicle, cyclist and pedestrian flows, injury data, geometric design, traffic control and built environment characteristics in the vicinity of each intersection. Bayesian multivariate Poisson models are used to analyze the injury and traffic flow outcomes and to develop safety performance functions for each mode at both facilities. After model calibration, contributing injury frequency factors are identified. Injury frequency and injury risk measures are then generated to carry out a comparative study to identify which mode is at greatest risk at intersections in Montreal. Among other results, this study identified the significant effect that motor-vehicle traffic imposes on cyclist and pedestrian injury occurrence. Motor-vehicle traffic is the main risk determinant for all injury and intersection types. This highlights the need for safety improvements for cyclists and pedestrians who are, on average, at 14 and12 times greater risk than motorists, respectively, at signalized intersections. Aside from exposure measures, this work also identifies some geometric design and built environment characteristics affecting injury occurrence for cyclists, pedestrians and motor-vehicle occupants.
本文提出了一种多模态方法,通过同时分析机动车和非机动车交通的安全与流量结果来研究交叉路口的安全性。本研究使用了加拿大魁北克省蒙特利尔岛上大量的信号控制和无信号控制交叉路口清单,其中包含每个交叉路口附近的机动车、自行车和行人流量的分类数据、伤害数据、几何设计、交通控制和建筑环境特征。贝叶斯多元泊松模型用于分析伤害和交通流量结果,并为两种设施的每种交通方式开发安全性能函数。在模型校准后,确定了造成伤害频率的因素。然后生成伤害频率和伤害风险度量,以进行比较研究,确定在蒙特利尔的交叉路口哪种交通方式面临的风险最大。除其他结果外,本研究还确定了机动车交通对自行车和行人受伤发生率的显著影响。机动车交通是所有伤害类型和交叉路口类型的主要风险决定因素。这凸显了改善自行车骑行者和行人安全的必要性,在信号控制交叉路口,他们平均分别比驾车者面临的风险高14倍和12倍。除了暴露度量外,这项工作还确定了一些影响自行车骑行者、行人以及机动车驾乘人员受伤发生率的几何设计和建筑环境特征。