Giusto Gessica, Gandini Marco, Amedeo Stefano
Department of Veterinary Sciences, University of Turin, 10090 Grugliasco TO, Italy.
Am J Vet Res. 2014 Jul;75(7):680-4. doi: 10.2460/ajvr.75.7.680.
To determine effects of staple size, precompression time, and tissue thickness on staple shape and tissue approximation in side-to-side jejunocecal anastomosis in equine specimens.
Cecum, ileum, and jejunum specimens obtained from 18 healthy horses at an abattoir.
Specimens were allotted into 2 groups. Anastomoses were stapled with 4.8-or 3.8-mm staples. Precompression time was 15 seconds for both groups. Staple lines were cut into proximal, middle, and distal sections. Thickness of intestinal walls was measured with a calibrated tissue micrometer, photographs were obtained, and intestinal tissues were digested. An investigator measured staples and assessed the shape of staples on high-definition digital images. Number of optimally shaped staples and staple height were compared among sections and between groups.
Use of 4.8-mm staples resulted in poor approximation of tissues in the distal sections of anastomoses. The percentage of optimally shaped staples was 538 of 551 (97.6%) and 616 of 634 (97.2%) for 4.8- and 3.8-mm staples, respectively. The percentage of optimally shaped staples did not differ significantly between groups for the same sections. There was a lower percentage of optimally shaped staples in the distal sections than in the proximal and middle sections of each group. Mean staple height did not differ significantly among sections of each group.
Use of 3.8-mm staples with an adequate precompression time for jejunocecal anastomosis in horses resulted in proper staple shape. These findings could be used to improve the technique and outcome for stapled jejunocecal anastomoses in horses.
确定吻合钉尺寸、预压缩时间和组织厚度对马标本侧侧空肠回肠吻合术中吻合钉形状和组织对合的影响。
从屠宰场的18匹健康马获取的盲肠、回肠和空肠标本。
将标本分为2组。用4.8毫米或3.8毫米的吻合钉钉合吻合口。两组的预压缩时间均为15秒。将吻合钉线切成近端、中间和远端部分。用校准的组织测微计测量肠壁厚度,拍摄照片,并消化肠组织。一名研究人员测量吻合钉并在高清数字图像上评估吻合钉的形状。比较各部分之间以及两组之间形状最佳的吻合钉数量和吻合钉高度。
使用4.8毫米吻合钉导致吻合口远端部分的组织对合不佳。4.8毫米和3.8毫米吻合钉形状最佳的吻合钉百分比分别为551个中的538个(97.6%)和634个中的616个(97.2%)。同一部分两组之间形状最佳的吻合钉百分比差异不显著。每组远端部分形状最佳的吻合钉百分比低于近端和中间部分。每组各部分的平均吻合钉高度差异不显著。
在马的空肠回肠吻合术中使用3.8毫米吻合钉并给予足够的预压缩时间可使吻合钉形状合适。这些发现可用于改进马的吻合钉空肠回肠吻合术的技术和效果。