Thiele Robert H, Bartels Karsten, Gan Tong J
1Department of Anesthesiology, University of Virginia, Charlottesville, VA. 2Department of Anesthesiology, University of Colorado Denver, Aurora, CO. 3Department of Anesthesiology, Stony Brook University, Stony Brook, NY.
Crit Care Med. 2015 Jan;43(1):177-85. doi: 10.1097/CCM.0000000000000608.
An increasing number of minimally or noninvasive devices are available to measure cardiac output in the critical care setting. This article reviews the underlying physical principles of these devices in addition to examining both animal and human comparative studies in an effort to allow clinicians to make informed decisions when selecting a device to measure cardiac output.
Peer-reviewed manuscripts indexed in PubMed.
A systematic search of the PubMed database for articles describing the use of cardiac output monitors yielded 1,526 sources that were included in the analysis.
From all published cardiac output monitoring studies reviewed, the animal model, number of independent measurements, and correlation between techniques was extracted.
Comparative studies in animals and humans between devices designed for measurement of cardiac output and experimental reference standards indicate thermodilution and Doppler-based techniques to have acceptable accuracy across a wide range of hemodynamic conditions, with bioimpedance techniques being less accurate. Thermodilution devices are marginally more accurate than Doppler-based devices but suffer from slower response time, increased invasiveness, and require stable core temperatures, good operator technique, and a competent tricuspid valve. Doppler-based techniques are less invasive and offer beat-to-beat measurements and excellent trending ability, but are dependent on accurate beam alignment and knowledge of aortic cross-sectional area. Studies of newer devices, such as pulse contour analysis, partial rebreathing, and pulse wave velocity, are far less in number and are primarily based on comparisons with thermodilution-based cardiac output measurements. Studies show widely ranging results.
Thermodilution is relatively accurate for cardiac output measurements in both animals and humans when compared to experimental reference standards. Doppler-based techniques appear to have similar accuracy as thermodilution pulmonary artery catheters. Bioimpedance, pulse contour, partial rebreathing, and pulse wave velocity-based devices have not been studied as rigorously; however, the majority of studies included in this analysis point towards decreased accuracy.
在重症监护环境中,越来越多的微创或无创设备可用于测量心输出量。本文除了回顾这些设备的基本物理原理外,还审视了动物和人体的对比研究,以便临床医生在选择测量心输出量的设备时能够做出明智的决策。
PubMed 中索引的同行评审手稿。
对 PubMed 数据库进行系统检索,以查找描述心输出量监测器使用情况的文章,共获得 1526 篇纳入分析的来源。
从所有已发表的回顾性心输出量监测研究中,提取动物模型、独立测量次数以及技术之间的相关性。
在动物和人体中,针对设计用于测量心输出量的设备与实验参考标准进行的对比研究表明,热稀释法和基于多普勒的技术在广泛的血流动力学条件下具有可接受的准确性,而生物电阻抗技术的准确性较低。热稀释设备比基于多普勒的设备略精确,但响应时间较慢,侵入性增加,并且需要稳定的核心体温、良好的操作技术和正常的三尖瓣。基于多普勒的技术侵入性较小,可提供逐搏测量和出色的趋势分析能力,但依赖于精确的波束对准和主动脉横截面积的知识。对更新的设备,如脉搏轮廓分析、部分再呼吸和脉搏波速度的研究数量要少得多,并且主要基于与基于热稀释的心输出量测量的比较。研究结果差异很大。
与实验参考标准相比,热稀释法在动物和人体心输出量测量中相对准确。基于多普勒的技术似乎与热稀释肺动脉导管具有相似的准确性。基于生物电阻抗、脉搏轮廓、部分再呼吸和脉搏波速度的设备尚未得到严格研究;然而,本分析中纳入的大多数研究表明准确性有所下降。