Hagihara Koji, Shakudo Shuhei, Fujii Kenta, Nakano Takayoshi
Department of Adaptive Machine Systems, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan.
Department of Adaptive Machine Systems, Graduate School of Engineering, Osaka University, 2-1 Yamadaoka, Suita, Osaka 565-0871, Japan.
Mater Sci Eng C Mater Biol Appl. 2014 Nov;44:285-92. doi: 10.1016/j.msec.2014.08.037. Epub 2014 Aug 19.
With the goal of developing new biodegradable implant materials, we have investigated the degradation behavior of (Ca, Mg)-based intermetallic compounds. The degradation behavior of the compounds within the Ca-Mg-Zn system was roughly classified into four groups, and their behaviors were strongly influenced by the compositions of the compounds. For example, the Ca3MgxZn(15-x) compound exhibited a large solubility region with varying the Mg/Zn ratio, and the Ca3Mg12Zn3 phase alloy with the lowest Zn content was rapidly broken apart within 6h of immersion. Alternatively, the Ca3Mg4.6Zn10.4 phase alloy with the highest Zn content retained the bulk shape even after 250 h of immersion. These varying degradation behaviors were ascribed to the difference in the formability of Zn oxide as a protective layer against corrosion on the specimen surfaces, depending on the Zn content. The gained results suggest that there is a feasibility on developing new biodegradable materials based on intermetallic compounds in which the degradation rate can be controlled by their compositions.
以开发新型可生物降解植入材料为目标,我们研究了(钙,镁)基金属间化合物的降解行为。钙 - 镁 - 锌体系内化合物的降解行为大致分为四类,其行为受化合物组成的强烈影响。例如,Ca3MgxZn(15 - x)化合物在改变镁/锌比时表现出较大的溶解区域,锌含量最低的Ca3Mg12Zn3相合金在浸泡6小时内迅速分解。相反,锌含量最高的Ca3Mg4.6Zn10.4相合金即使在浸泡250小时后仍保持块状形状。这些不同的降解行为归因于根据锌含量在试样表面形成作为防腐蚀保护层的氧化锌的可成形性差异。所得结果表明,基于金属间化合物开发新型可生物降解材料具有可行性,其中降解速率可通过其组成来控制。