Ultramorphological assessment of dentin-resin interface after use of simplified adhesives.

This study assessed dentin-resin interface integration in Class I cavities restored with simplified adhesives by using a focused ion-beam milling (FIB) and transmission electron microscope (TEM). Class I cavities (1.5-mm depth with dentin thickness of ∼0.5 mm, 4-mm length, and 2-mm width) were prepared on freshly extracted, sound human molars. Two all-in-one adhesive systems (Scotchbond/Single Bond Universal [SUD] and Xeno-V(+) [X5D]) were used and compared with a two-step etch-and-rinse system (Prime&Bond NT [NTD]). The adhesives were applied according to the manufacturers' guidelines. A universal resin composite (Filtek Z350 XT Universal) was used to restore the cavities in one bulk filling and was irradiated at 550 mW/cm(2) for 40 seconds by a quartz-tungsten-halogen light (Optilux 501). After exposure to liquid nitrogen coolant, the specimens were milled to nanoscale thickness by FIB to view and then assess the area of dentin-resin interface by TEM. Unlike the unfilled X5D, a noticeably smooth transition zone at the dentin-resin interface was shown for the SUD and NTD adhesives. The SUD demonstrated an uneven hybrid layer with clearly demineralized collagen bundles. Ultramorphologically, dispersed needlelike apatite crystals were detected within the partially demineralized dentin or the hybrid layer of both compositionally different all-in-one simplified adhesives. Conversely, these crystals were entirely absent from the hybrid layer of the etch-and-rinse NTD adhesive. In the X5D group, a bright band was noted beneath the hybrid layer. The methacryloxydecyl dihydrogen phosphate monomer containing ultramild self-etch adhesive (SUD) was still validated in terms of its capability in dentin adhesion.