Suppr超能文献

中心主动脉至肺动脉连接部血流的计算流体动力学特征:分流角度作为剪切应力诱导血栓形成决定因素的重要性。

Computational fluid dynamics characterization of blood flow in central aorta to pulmonary artery connections: importance of shunt angulation as a determinant of shear stress-induced thrombosis.

作者信息

Celestin Carey, Guillot Martin, Ross-Ascuitto Nancy, Ascuitto Robert

机构信息

Department of Mechanical Engineering, University of New Orleans, New Orleans, LA, 70148, USA.

出版信息

Pediatr Cardiol. 2015 Mar;36(3):600-15. doi: 10.1007/s00246-014-1055-7. Epub 2014 Nov 18.

Abstract

The central aortic shunt, consisting of a Gore-Tex (polytetrafluoroethylene) tube (graft) connecting the ascending aorta to the pulmonary artery, is a palliative operation for neonates with cyanotic congenital heart disease. These tubes often have an extended length, and therefore must be angulated to complete the connection to the posterior pulmonary arteries. Thrombosis of the graft is not uncommon and can be life-threatening. We have shown that a viscous fluid (such as blood) traversing a curve or bend in a small-caliber vessel or conduit can give rise to marked increases in wall shear stress, which is the major mechanical factor responsible for vascular thrombosis. Thus, the objective of this study was to use computational fluid dynamics to investigate whether wall shear stress (and shear rate) generated in angulated central aorta-to-pulmonary artery connections, in vivo, can be of magnitude and distribution to initiate platelet activation/aggregation, ultimately leading to thrombus formation. Anatomical features required to construct the computer-simulated blood flow pathways were verified from angiograms of central aortic shunts in patients. For the modeled central aortic shunts, we found wall shear stresses of (80-200 N/m(2)), with shear rates of (16,000-40,000/s), at sites of even modest curvature, to be high enough to cause platelet-mediated shunt thrombosis. The corresponding energy losses for the fluid transitions through the aorta-to-pulmonary connections constituted (70 %) of the incoming flow's mechanical energy. The associated velocity fields within these shunts exhibited vortices, eddies, and flow stagnation/recirculation, which are thrombogenic in nature and conducive to energy dissipation. Angulation-induced, shear stress-mediated shunt thrombosis is insensitive to aspirin therapy alone. Thus, for patients with central aortic shunts of longer length and with angulation, aspirin alone will provide insufficient protection against clotting. These patients are at risk for shunt thrombosis and significant morbidity and mortality, unless their anticoagulation regimen includes additional antiplatelet medications.

摘要

中心主动脉分流术是一种用于患有青紫型先天性心脏病新生儿的姑息性手术,它由一根连接升主动脉和肺动脉的戈尔特斯(聚四氟乙烯)管(移植物)组成。这些管子通常较长,因此必须弯曲以完成与后肺动脉的连接。移植物血栓形成并不罕见,且可能危及生命。我们已经表明,粘性流体(如血液)在小口径血管或导管中通过曲线或弯曲处时,可导致壁面剪应力显著增加,而壁面剪应力是导致血管血栓形成的主要力学因素。因此,本研究的目的是使用计算流体动力学来研究在体内成角的中心主动脉至肺动脉连接中产生的壁面剪应力(和剪切速率)的大小和分布是否能够引发血小板活化/聚集,最终导致血栓形成。构建计算机模拟血流路径所需的解剖特征通过患者中心主动脉分流术的血管造影进行了验证。对于模拟的中心主动脉分流术,我们发现在曲率适中的部位,壁面剪应力为(80 - 200 N/m²),剪切速率为(16,000 - 40,000/s),足以引起血小板介导的分流血栓形成。流体通过主动脉到肺动脉连接的相应能量损失占流入流体机械能的(70%)。这些分流器内的相关速度场表现出漩涡、涡流和流动停滞/再循环,它们本质上具有血栓形成性且有利于能量耗散。成角诱导的、剪应力介导的分流血栓形成对单独使用阿司匹林治疗不敏感。因此,对于长度较长且有成角的中心主动脉分流术患者,仅使用阿司匹林提供的抗凝血保护不足。这些患者有分流血栓形成以及严重发病和死亡的风险,除非他们的抗凝方案包括额外的抗血小板药物。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验