Razgulyaeva E A
Tyumen Regional Ophthalmological Treatment Center, Tyumen 625000-625010, Russia.
Case Rep Ophthalmol Med. 2014;2014:289354. doi: 10.1155/2014/289354. Epub 2014 Nov 23.
For laser-assisted in situ keratomileusis (LASIK) retreatments with a previous unsuccessful mechanical microkeratome-assisted surgery, some surgical protocols have been described as feasible, such as relifting of the flap or the creation of a new flap and even the change to a surface ablation procedure (photorefractive keratectomy (PRK)). This case shows the use of femtosecond technology for the creation of a secondary flap to perform LASIK in a cornea with a primary incomplete flap obtained with a mechanical microkeratome. As we were unable to characterize the interface of the first partial lamellar cut, a thick flap was planned and created using a femtosecond laser platform. As the primary cut was very thick in the nasal quadrant, a piece of loose corneal tissue appeared during flap lifting which was fitted in its position and not removed. Despite this condition and considering the regularity of the new femtosecond laser cut, the treatment was uneventful. This case report shows the relevance of a detailed corneal analysis with an advanced imaging technique before performing a secondary flap in a cornea with a primary incomplete flap. The femtosecond laser technology seems to be an excellent tool to manage such cases successfully.
对于既往机械微型角膜刀辅助手术失败后的准分子原位角膜磨镶术(LASIK)再次手术,一些手术方案已被描述为可行的,例如掀起角膜瓣或制作新的角膜瓣,甚至改为表面切削手术(准分子激光角膜切削术(PRK))。本病例展示了使用飞秒技术制作二次角膜瓣,以便在通过机械微型角膜刀获得的初次不完全角膜瓣的角膜上进行LASIK手术。由于我们无法确定第一次部分板层切割的界面,因此计划并使用飞秒激光平台制作一个厚角膜瓣。由于鼻侧象限的初次切割非常厚,在掀起角膜瓣时出现了一片松动的角膜组织,将其复位并未移除。尽管存在这种情况,但考虑到新的飞秒激光切割的规则性,手术过程顺利。本病例报告显示了在初次不完全角膜瓣的角膜上进行二次角膜瓣手术前,使用先进成像技术进行详细角膜分析的重要性。飞秒激光技术似乎是成功处理此类病例的极佳工具。