Yue Ning J, Goyal Sharad, Park Joo Han, Jones Sheri, Xu Xiaoting, Khan Atif, Haffty Bruce G, Chen Ting
Department of Radiation Oncology, Rutgers Cancer Institute of New Jersey, Rutgers-Robert Wood Johnson Medical School, Rutgers, The State University of New Jersey , New Brunswick, NJ , USA.
Department of Radiation Oncology, The First Affiliated Hospital of Soochow University , Suzhou , China.
Front Oncol. 2014 Dec 2;4:342. doi: 10.3389/fonc.2014.00342. eCollection 2014.
Blocks have been used to protect heart from potential radiation damage in left-sided breast treatments. Since cardiac motion pattern may not be fully captured on conventional 3DCT or 4DCT simulation scans, this study was intended to investigate the optimization of the heart block design taking the cardiac motion into consideration.
Whole breast treatment plans using two opposed tangential fields were designed based on 4DCT simulation images for 10 left-sided breast cancer patients. Using an OBI system equipped to a Varian Linac, beam-eye viewed fluoroscopy images were acquired for each of the treatment beams after patient treatment setup, and the MLC heart blocks were overlaid onto the fluoroscopy images with an in-house software package. A non-rigid image registration and tracking algorithm was utilized to track the cardiac motion on the fluoroscopy images with minimal manual delineation for initialization, and the tracked cardiac motion information was used to optimize the heart block design to minimize the radiation damage to heart while avoiding the over-shielding that may lead to underdosing certain breast tissues.
Twenty-three sets of fluoroscopy images were acquired on 23 different days of treatment for the 10 patients. As expected, heart moved under the influences of both respiratory and cardiac motion. It was observed that for 16 out of the 23 treatments, heart moved beyond the planed heart block into treatment fields and MLC had to be adjusted to fully block heart. The adjustment was made for all but one patient. The number of the adjusted MLC leaves ranged from 1 to 16 (mean = 10), and the MLC leaf position adjustment ranged from 2 to 10 mm (mean = 6 mm). The added heart block areas ranged from 3 to 1230 mm(2) (mean = 331 mm(2)).
In left-sided whole breast radiation treatments, simulation CT (and 4DCT) based heart block design may not provide adequate heart protection for all the treatments. A fluoroscopy-based method has been developed to adaptively optimize the heart MLC block to achieve optimal heart protection.
在左侧乳腺癌治疗中,铅块已被用于保护心脏免受潜在的辐射损伤。由于传统的三维计算机断层扫描(3DCT)或四维计算机断层扫描(4DCT)模拟扫描可能无法完全捕捉心脏运动模式,本研究旨在探讨在考虑心脏运动的情况下优化心脏铅块设计。
基于10例左侧乳腺癌患者的4DCT模拟图像,设计了使用两个相对切线野的全乳治疗计划。使用配备在瓦里安直线加速器上的机载影像系统(OBI),在患者治疗摆位后为每个治疗射束采集射野影像透视图像,并使用内部软件包将多叶准直器(MLC)心脏铅块叠加在透视图像上。利用一种非刚性图像配准和跟踪算法,以最少的手动描绘进行初始化,在透视图像上跟踪心脏运动,跟踪到的心脏运动信息用于优化心脏铅块设计,以尽量减少对心脏的辐射损伤,同时避免可能导致某些乳腺组织剂量不足的过度屏蔽。
在10例患者的23个不同治疗日采集了23组透视图像。正如预期的那样,心脏在呼吸和心脏运动的影响下移动。观察到在23次治疗中的16次,心脏移动到计划的心脏铅块之外进入治疗野,必须调整MLC以完全遮挡心脏。除一名患者外,对所有患者都进行了调整。调整的MLC叶片数量范围为1至16片(平均=10片),MLC叶片位置调整范围为2至10毫米(平均=6毫米)。增加的心脏铅块面积范围为3至1230平方毫米(平均=331平方毫米)。
在左侧全乳放射治疗中,基于模拟CT(和4DCT)的心脏铅块设计可能无法为所有治疗提供足够的心脏保护。已开发出一种基于透视的方法来自适应优化心脏MLC铅块,以实现最佳的心脏保护。